NEC P701 Operation & User’s Manual

Important Information ................................................................................................................................... English-2 WARNING, CAUTION ........... ...

television reception. (1) Please use the supplied power cord or equivalent to ensure FCC compliance. (2) Please use a good quality shielded video signal cable. Use of other cables and adapters may ...

USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERV ...

FOLLOWING WHEN SETTING UP AND USING THE MULTI-FUNCTION MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Do not spill any liq ...

• LCD monitor • Power cord*1 • Video Signal Cable • Wireless Remote Control and AA Batteries • Cable cover • Setup Manual • Clamp • Screw (M4) x 7 • CD-ROM • Eyebolt (M12) x 2 • Washer for eyebolt (M12) x 2 • Eyebolt (M8) x 2 • Washer for eyebolt (M8) x ...

Stand or other mounting accessory for support. For proper installation it is strongly recommended to use a trained, NEC authorized service person. Failure to follow NEC standard mounting procedures could result in damage to the equipment or injury to the user or installer. Product ...

The display is designed for use with the VESA mounting system. 1. Attach Mounting Accessories CAUTION: Attaching mounting accessories must be done by using eyebolts (M12). Do not attempt to mount or carry the display using your own strength as the display may fall and cause personal injury. When attaching the mounting ...

b. Prevent Tipping When using the display with the optional tabletop stand, fasten the LCD to a wall using a cord or chain that can support the weight of the monitor in order to prevent the monitor from falling. Fasten the cord or chain to the monitor using the eyebolts (M8). When using eyebolts (M8) for prevent the monitor fr ...

Acts as EXIT button within the OSD to move to previous menu. Remote control sensor and Power Indicator Receives the signal from the remote control (when using the wireless remote control). See also page 12. Glows green when the LCD monitor is in active mode*. Glows red when the L ...