NetComm NB1300 Operation & User’s Manual

Page 2 NB1300 ADSL Modem Contents Overview ........................................................................................................................ 4 Package Contents ........................................................................................... 4 Connecting your NB1300 .......................... ...

www.netcomm.com.au NB1300 ADSL Modem Page 3 Misc Configuration ......................................................................................... 56 System Log .................................................................................................... 58 Code Update............................................................. ...

Page 4 NB1300 ADSL Modem Overview Section Overview Package Contents The following items should be contained in your NB1300 ADSL Modem Package: ❒ ADSL Modem (NB1300) ❒ Package Contents Note and a User Guide ❒ Power Adaptor (12VAC/800mA) ❒ Telephone Line Cable (RJ11) and 605 to RJ11 Adaptor ❒ Ethernet Network Cable ( ...

www.netcomm.com.au NB1300 ADSL Modem Page 5 Overview Section Connecting your NB1300 The NB1300 can be connected via a USB cable or an Ethernet cable or both. The reason for this is that the USB connection is simply an ethernet simulation, as far as your computer is concerned the USB connection is an Ethernet connection, hence DHCP and other ...

Page 6 NB1300 ADSL Modem Overview Section Connecting your NB1300 ADSL Modem via USB 1. Connect the power pack to the NB1300 ADSL Modem and switch on the power switch. 2. Connect your NB1300 to a computer directly via USB cable. 3. The Add New Hardware Wizard will launch and prompt you to provide a driver for your NB1300 ADSL ...

www.netcomm.com.au NB1300 ADSL Modem Page 7 Overview Section Do I need a Micro filter? Micro filters are used to prevent common telephone equipment, such as phones, answering machines and fax machines, from interfering with your ADSL service. If your ADSL enabled phone line is being used with any other equipment other than your ADSL Modem t ...

Page 8 NB1300 ADSL Modem Overview Section LED Indicators The LED Indicators are located on the front of the unit, they are green in colour. The meanings are as follows: Label Meaning Status Indicates: PWR Power On Power is on Off Power is off RDY Ready Flashing Unit is powered up correctly when pulsing steadily. ON or OFF du ...

www.netcomm.com.au NB1300 ADSL Modem Page 9 Overview Section Using Easy Config Loading an ISP profile into your NB1300 NetComm’s Easy Config software is supplied to help you to configure your NB1300 for a quick connection to the Internet. You can use one of the default profiles provided or you can use a profile that is provided by your Int ...

Page 10 NB1300 ADSL Modem Overview Section Factory Defaults The following table lists the Factory Defaults of your NB1300 ADSL Modem: Field Setting Details LAN IP address: 192.168.1.1 LAN Subnet Mask: 255.255.255.0 DHCP Server: Enabled User Name: admin Password: password Main Function: Router (Bridge Disabled) WAN connection ...