NETGEAR PTVU1000 Installation Manual

All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of NETGEAR, Inc. DO NOT stack equipment, or place equipment in tight spaces or in drawers. Be sure your equipment is surro ...

For table top positioning: a. Slide the shutter to show the top USB port. b. Attach the TV Adapter to the HD base. 2. Connect the HD base to your TV using the included HDMI cable. 3. Connect the power cable, as shown below. ...

5. Connect to your TV using an HDMI cable. The Push2TV unit boots up for about 10 seconds, and the Ready to Connect screen is displayed on your TV. ...

Push2TV Software Setup installation window displays. . NOTE: Before installing the software, be sure to unplug the PC adapter from your PC. 2. Select the installation language from the drop-down menu, and click the Install Universal Push2TV HD Software button to ...

1. Connect the PC Adapter to a USB port on your PC. Be sure to keep the PC Adapter in an upright position only. 2. After you plug in the PC adapter, the connection is started automatically. The laptop screen then displays on your TV, and the Universal Push2TV icon turns green . Two additional items then appear in your Microsoft Wind ...

maximum distance of 20 feet (approximately 6 meters) from each other, and with no obstacles between them. You are all set and ready to go! NOTE: • For more information, see the User Manual, accessible through the icon in the Task tray. • In Mirror Mode, the screen re ...

Go to Control Panel > Sound, and you can adjust the sound in one of the following ways: If using S/PDIF or HDMI (Digital output) Click Digital Output USB PnP Sound Device and click Set Default. If using 3.5 mm jack (Analog output) Click Speakers USB PnP Sound Device and click Set Default. * * ...

NETGEAR recommends that you use the AERO Desktop Theme for better video performance. • Right-click the desktop and select Personalize. • For Vista, select Window Color and Appearance. Select Open classic appearance properties for more color options. Select Windows Aero from t ...