NETGEAR WGT634U Quick Start Manual

Verify That Basic Requirements Are Met Assure that the following requirements are met: • You have your broadband Internet service settings handy. • The networking settings of the computer are set to obtain an IP address automatically. For instructions on how to do this, please see the animated t ...

a. You are now connected to the router. If you do not see the menu above, click the Setup Wizard link on the upper left of the main menu. b. Click Next to proceed. Follow the screen prompts and input your ISP settings, as needed. c. If prompted with the message that new software is available, click Yes to up ...

You can use Windows Network Neighborhood or Network Connections to view files on the USB drive locally. For example, to connect to the USB drive from local computers using Windows XP: 1. From the Start Menu, open My Network Places. 2. Open the folder containing the files to access, for example: share/partition1/ ...

3. In the DOS window, you can view your current IP settings by typing ipconfig. 4. Release your current IP settings by typing: ipconfig /release 5. Type ipconfig again to verify that the settings have been released. Renew the IP settings by typing: ipconfig /renew You may have to wait a few minutes for the ...

are trademarks or registered trademarks of Netgear, Inc. in the United States and/or other countries. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries. Other brand and product names are trademarks or registered tradema ...