NETGEAR FS605 v2 Installation Manual

10/100 Mbps FS605 v2/FS608 v2 Technical Support PLEASE REFER TO THE SUPPORT INFORMATION CARD THAT SHIPPED WITH YOUR PRODUCT. By registering your product at www.NETGEAR.com/register, we can provide you with faster expert technical support and timely notices of product and software upgrades. NETGEAR, INC. Support Information Phone: 1-888-NETGEAR (For US & Canada only) - 24 x7 phone support See Support Information card for other countries. E-mail: [email protected] (24 x 7 online support) www.NETGEAR.com © 2003 NETGEAR, Inc. NETGEAR, the Netgear logo, The Gear Guy, Auto Uplink and Everybody's Connecting are trade ...

a low-cost, reliable, high-performance switch to connect up to five or eight different Ethernet- enabled devices (such as computers, file servers, print servers, printers, routers and hubs). You use the FS605 v2/FS608 v2 switch to build a small network that enables you to have 10 Mbps or 100 Mbps access to other devices on the network. Also, with this switch, you can add extra computers to your cable or DSL router. Unlike a hub that shares its connection with all devices, the FS605 v2/FS608 v2 switch provides a full, dedicated 100 Mbps (or 10 Mbps) connec ...

Contents When you open the box, verify that you received everything. The package includes: • 5/8-Port Fast Ethernet Switch FS605 v2/FS608 v2 • AC power adapter • Wall-mounting screws • FS605 v2/FS608 v2 Installation Guide (this document) • Warranty and support information card If you don’t have everything listed above, see the support information card for contact information. If you’re missing the Technical Support information card itself, get contact information at www.NETGEAR.com in the Customer Service area. Installation guide, warranty/registration card and support information card Power adapter Fast Ethe ...

Devices 1. Place the switch on a flat surface or hook onto the screws. 2. For each device, insert one end of an Ethernet cable into the port in the device and insert the other end into one of the Ethernet ports on the switch. Note: If you have more than 5 or 8 devices to connect to this switch, you must connect them to a hub or other switch and then connect that hub or switch to this switch. 3. Connect the power adapter’s cord into the back of the switch and then plug the adapter into a power source (such as a wall socket or power strip). The Power light should light up. The corresponding port number for each ...