Faria GPS100 Owner's Manual

Text of Faria GPS100 Owner's Manual

Faria GPS100 Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a normal installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication

Ensure that the

channel is filled with silicon to provide a seal when gasket is in place. 5. Attach the four threaded pins to the antenna. 6. Peel the plastic off the gasket. 7. Place antenna in final position. 8. Attach the four nuts to the threaded rod. Do not overtighten. 9. Attach to instrument, then secure the cable at regular intervals. 2 Choosing a suitable location for the antenna Mount the antenna with a good view of the sky and horizon. The vie

Copyright 2005 by the Thomas G. Faria Corporation, Uncasville CT

No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the company. Faria® is the trademark of the Thomas G. Faria Corporation Clean the antenna with a damp cloth or mild detergent. Avoid abrasive cleaners, petrol or other solvents. When repainting the surrounding area, cover the antenna with masking

Faria Antenna Owners Instructions: