Olivetti Fax-Lab 115 Instructions Manual

This product has been designed and developed to operate in the networks of all European Community countries, and in those of Switzerland and Norway. Full compatibility with the networks of individual countries will depend on specific national software parameters which can be set in the product. If you encounter problems with non EC PSTN networks, contact your national technical support service. Your attention is drawn to t ...

BEFORE YOU START 3 CONSULTING THE MANUAL ....................................................... 3 ENVIRONMENTAL RECYCLING................................................... 3 SAFETY PRECAUTIONS .............................................................. 3 ABOUT THE INSTALLATION AND SETUP PARAMETERS ........... 4 ABOUT THE FAX MACHINE 5 CONSOLE ............................................................................ ...

CONSULTING THE MANUAL This manual is divided into two sections: the first section "About the fax machine" and "How to get started quickly" provide a summary of the fax machine's features, allowing you to install it and get started immediately, using its basic functions only. After this initial phase, the second section of the manual can be consulted. In it you will find a detailed description of the fax machine and its many functions. EN ...

PARAMETERS As the country default values for each installation and setup parameter may change due to certification requirements or specific customers’ needs, these values do not always corre- spond to those indicated in the manual: it is therefore advis- able to print them before changing them. ...

CONSOLE • Dial the fax or telephone number. • If pressed for more than a second, they auto- matically dial (once set) the telephone or fax number assigned to them (one-touch dialling function). • Enter numeric data. • Select digits and alphanumeric characters dur- ing the entry of numbers and names. "Error" LED indicator Signals an operating fault during transmission or reception. On, indicates that there are messages or mem ...

• Turns off the " " LED indicator. • Returns the fax machine to the stand-by mode. • Stops the programming, transmission, reception or copying operation in progress. • Starts receiving a document. • After the fax number has been dialled, starts sending a document (only with the document inserted in the ADF). • Confirms the selection of menus, submenus, param- eters and their values and moves on to the next ...

PAPER SUPPORT EXTENSION CONNECTION SOCKETS BUILT-IN TELEPHONE HANDSET DISPLAY The display consists of two lines of 16 characters each. It shows the date and time, menu items, error messages, reso- lution and contrast values. PLAIN PAPER FEED COMPARTMENT (ASF) Maximum capacity: 40 sheets (80gr/m2). AUTOMATIC FEEDER FOR DOCUMENTS TO BE SENT AND COPIED (ADF) MAXIMUM CAPACITY: 5 SHEE ...

This section provides a basic description of the fax ma- chine, explaining how to install it and get started quickly, us- ing its basic functions only. For a more comprehensive use of the fax machine, see the corresponding section. As this section is designed to give you a gradual and sys- tematic approach to the fax machine, we recommend you read the topics in the order in which they are presented. PACKAGE CONTENTS In addition ...

� � 1 1. A. Insert the female connector at one end of the power ca- ble into the male connector on the rear of the fax ma- chine. B. Then insert the plug at the other end of the cable into the wall power socket. ��������� The plug of the power supply cable may vary from country to country. SETTING SOME PARAMETERS Once the fax is connected to the power supply, the fax ma- chine automaticall ...

show the letter "p" (post meridiem) or the letter "a" (ante meridiem). To switch from one format to the other: 1. Position the cursor, using the �/� keys, below the letter to be modified. 2. Press the key. 3. If you think you have made a mistake and want to abort the procedure in progress, press the key. TO CHANGE THE DATE AND TIME If the date and time shown on the display a ...

the wrong character, by pressing the keys: �/� 9. Then overwrite the character with the correct one, by pressing the keys: - 10. To delete the name completely, press the key: For example, to enter the name "LARA": Until you have selected the letter "L". Until you have selected the letter "A". Until you have selected the letter "R". Until you have selected the letter "A". ...

��������� Once the print head provided with the machine is worn, re- member only to use original print heads (see code printed at the end of the manual). If, after the print head has been installed, the "CHECK PRINT HEAD" message appears again, try removing it and then reinserting it, pressing it more firmly into position. If the mes- sage remains on the display, remove the print head and clean the electrical cont ...

diately use the fax machine to carry out simple trans- mission operations. In any case, if these procedures are not enough for you, see the "Transmission and reception operations" chapter, which provides a detailed description of all the transmission modes and other dialling procedures (one-touch and speed dialling, etc.) for which the fax machine has to be set up (see "To set one- ...

"PHONE/FAX", press the keys: �/� 4. To confirm the setting, press the key: 5. To return the fax machine to its initial stand-by mode, press the key: ���� To activate reception with TAD mode, you must first record the OUTGOING MESSAGE (see "The Telephone Answer- ing Device"). Once you have recorded it, in step 3 of the procedure indicated above, you can view the option ...

When you engage the line by lifting the telephone hand- set, you may use all the telephone functions available on ordinary telephones sold on the market. These also include the R function (REGISTER RECALL, ac- tivated by pressing the key) which provides access to the special services made available by the company that man- ages the telephone network. You can also use the following functions: • Call the correspondent using the fast ...

As for transmission, copying requires the document to be inserted in the automatic document feeder (ADF). Be- fore making a copy, make sure that the document is correctly inserted in the feeder and that it respects the characteristics described previously (see the "Transmission" section). Bear in mind however that for the copying function you can only insert one sheet at a time in the automatic docu- ment feede ...

TO SET IT UP FOR THE TELEPHONE LINE 19 TO CONNECT IT TO A PUBLIC LINE ......................................... 19 TO CONNECT IT TO A PRIVATE LINE (PBX) ............................. 19 TRANSMISSION AND RECEPTION OPERATIONS 21 TO SEND A DOCUMENT ............................................................ 21 WHAT DOCUMENTS MAY BE USED .......................................... 21 TO PLACE THE DOCUMENT IN THE ADF.......... ...