Olympus DP12 Instructions Manual

APPROVAL ORGANIZATIONS AND CORDAGE HARMONIZATION MARKING METHODS Approval Organization Printed or Embossed Harmoniza- tion Marking (May be located on jacket or insulation of internal wir- ing) Alternative Marking Utilizing Black-Red-Yellow Thread (Length of color section in mm) Black Red Yellow Comite Electrotechnique Belge (CEBEC) Verband Deutscher Elektrotechniker (VDE) e.V. Prüfstelle Union Technique de l´Electricite´ (UTE) Instituto Italiano del Marchio di Qualita´ (IMQ) British Approvals Service for Electric Cables (BASEC) N.V. KEMA SEMKO AB Svenska Elekt ...

Factory setup: RESET }The file and folder of a picture recorded with the DP12 are named respectively as file No. 0001 to 9999 and folder No. 100 to 999. The file and folder can be named by one of the two methods including AUTO and RESET. These options can be selected from item FILE MENU in the menu. Folder and file names A picture recorded with the DP12 is given a folder name and file name as shown below. * In the “month” expression for the file name, January to September are expressed as 1 to 9, October as A, November as B and December as C. How ...

Set the main switch of the control box to “ ” (OFF), remove the AC adapter’s output connector 3 from the control box then remove the power cord’s plug from the power outlet. CAUTION Always use a power supply with the specified voltage. Do not operate the camera system when any of the connectors and plugs of the AC adapter and power cord is not completely inserted. Never insert or remove the power cord’s plug or connector with a wet hand. If the AC adapter or cord is excessively hot or is emitting smoke or odor, immediately stop using the camera syst ...

}The DP12 displays warnings in the form of error codes. (The display in the LCD panel of the control box blinks during display.) LCD Panel LCD Monitor (PLAY mode only) Error Details Treatment The card cover is open. Insert a SmartMedia and close the card cover. CARD ERROR Data in the SmartMedia cannot be recorded, played or erased. If the SmartMedia is dirty, wipe with cleaning paper before insertion or format it. If this error occurs again, the SmartMedia is not usable. NO CARD There is no SmartMedia in- stalled in the camera system. Insert a SmartMedia. UNFORMATTED CA ...

If no power supply cord is provided, please select the proper power supply cord for the equipment by referring to “ Specifications ” and “ Certified Cord ” below: CAUTION: In case you use a non-approved power supply cord for Olympus products, Olympus can no longer warrant the electrical safety of the equipment. Specifications Voltage Rating Current Rating Temperature Rating Length Fittings Configuration 125V AC (for 100-120V AC area) or, 250V AC (for 220-240V AC area) 6A minimum 60°C minimum 3.05 m maximum Grounding type attachmen ...

1 Setting the Spot Metering (SPOT) (Fig. 16) }The camera system measures light using the center-weighted average method when the spot metering method is not used. · Center-weighted average metering: Generally employed photometry method which measures light in a wide range centered around the field center. · Spot metering: This photometry method measures only the light at the center of the LCD monitor. It can expose the target opti- mally without being affected by the background light. 1. Press the MODE button to ...

}Print reservation of all pictures in the SmartMedia se- lected at the time of reservation in the form of indexes is also possible. Reservation ON · Pictures recorded after index print reservation are not covered by the index print reservation. If there are non- reserved pictures in a SmartMedia, the “ ! ” marking appears next to menu item “CARD INDEX”. To make index print reservation of all pictures, restart the setting from the beginning. “ ! ” will disappear after this. Date/time printing }The recording date and/or time can be recorded when prin ...