Omron CP1H - Datasheet

Cat. No. P055-E1-01 Printed in Japan 1005-2.5M Note: Do not use this document to operate the Unit. OMRON Corporation Control Devices Division H.Q. Shiokoji Horikawa, Shimogyo-ku, Kyoto, 600-8530 Japan Tel: (81)75-344-7109 Fax: (81)75-344-7149 Regional Headquarters OMRON EUROPE B.V ...

a standard feature. Counters 4-axis differential phase control is a standard feature. Serial Communications Two ports supporting both RS-232C and RS-485. Serial Communications Two ports supporting both RS-232C and RS-485. Pulse Outputs Four axes are standard features. Pulse Outputs Four axes are standard features ...

Component Manufacturing Equipment Servo Drivers Pulse outputs Servomotors CP1H Eight interrupt inputs are built in. Quick-response inputs for pulse widths of 50 µs. The interrupt inputs can also be used as single- phase counters. (Response frequency: 5 kHz total for 8 inputs) Processing has been speeded up for n ...

either an RS-232C or RS-422A/485 interface. CP1H CP1H CP1H RS-232C Option Board CP1W-CIF01 RS-422A/485 Option Board CP1W-CIF11 Serial Option Boards Devices such as OMRON Temperature Controllers with CompoWay/F NS/NT-series PT NS/NT-series PT Personal computer USB cable Modbus-RTU Easy Master Serial PLC Link ...

Axis operating flag Speed matching flag Start trigger Inverter No. I/F Are ...

Programming is simplified by key inputs, such as the Key for an NC input (contact), the Key for an OUT instruction, and the Key for special instructions. Cross-reference information can be displayed for the input or output bit at the cursor to show where the address of ...

to Meet Current Needs or to Expand the System in the Future. CP1W-ME05M Memory Cassette CP1W-CIF01 RS-232C Option Board CP1W-CIF11 RS-422A/485 Option Board CP1W-EXT01 CJ Unit Adapter End Cover Flexibly Adjust the System Configuration to the Application by Adding Up to 7 CPM-series Expansion I/O U ...

24 inputs, 16 outputs 12 inputs, 8 outputs Line-driver inputs: Phases A, B, and Z for 2 axes Line-driver outputs: CW and CCW for 2 axes 1 MHz for 2 axes (line-driver output), 30 kHz for 2 axes (4 axes total) 100 kHz (single-phase), 50 kHz (differential phases), 4 axes 100 kHz for 2 axes and 30 kHz for 2 axes (4 axes total) USB port (periphe ...

7 Units Number of group A Units + Number of group B Units x 2 Can be used. Expansion: 1st Unit 2nd Unit 3rd Unit 4th Unit 5th Unit 6th Unit 7th Unit Cannot be used. Units Counted in the Seven Connectable Units Precautions when Using CP1W-CN811 I/O C ...

Power consumption 100 to 240 VAC 50/60 Hz 85 to 264 VAC 100 VA max. 24 VDC 20.4 to 26.4 VDC (21.6 to 26.4 VDC with four or more Expansion Units.) 50 W max. Inrush current 100 to 120 VAC inputs: 20 A max. 8 ms max./200 to 240 VAC inputs: 40 A max. 8 ms max. 30 A max. 20 ms max. External power supply 300 mA at 24 VD ...