NEC NEC Express5800 Series Software Installation

Note: Microsoft and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries. NNEECC EExxpprreessss55880000//112200LLhh O Oppeerraattiioonn M Maannuuaall FFoorr M Miiccrroossoofftt®® W Wiinnddoowwss SSeerrvveerr™ ™ 22000033,, SSttaannddaarrdd xx6644 EEddiittiioonn // M Miiccrroossoofftt ...

2 ™ This manual explains how to install the Microsoft® Windows Server™ 2003, Standard x64 Edition/Microsoft® Windows Server™ 2003, Enterprise x64 Edition (called the "Windows Server 2003 x64 Editions" hereinafter) by using an NEC difference module for the Window ...

3 ���� Items Required for Installation Before starting to install the Windows Server 2003 x64 Editions, check that the following media and manuals have been prepared: � NEC difference module for the Windows Server 2003 x64 Edition for the Express5800/120Lh (Ca ...

4 ���� Creating the Windows Server 2003 x64 Edition OEM-DISK for EXPRESSBUILDER The installation requires a floppy disk called the Windows Server 2003 x64 Edition OEM-DISK for EXPRESSBUILDER. Follow the creation steps below. TIPS When the Windows Server 2003 x6 ...

5 Before installing Windows Server 2003 x64 Editions, read the following precautions carefully. ���� Procedure for Obtaining a License When the backup CD-ROM is used, its content is installed in the licensed state. When other OS CD-ROMs are used, a procedure fo ...

6 ���� Re-Installation on a Dynamic Disk When the hard disk drive that has been upgraded to a dynamic disk is used for re-installation, if there is a partition other than the partition in which the OS is installed, and you want to keep that partition, note the f ...

7 ���� Size of a Created Partition The size of a partition where the system is installed can be calculated from the following expression: Required size for installation + paging file size + dump file size + application size Required size for installation = 4100M ...

8 ���� Creating a RAID Drive When SCSI HostRAID is to be used, set HostRAID to Enabled with the SCSI Select Utility to create a RAID drive before installation. For how to create a RAID drive, refer to the description of RAID configuration in the user's guide. ...

9 This chapter explains how to newly install the Windows Server 2003 x64 Editions. 1. Turn on the power to the system. IMPORTANT Update BIOS for the Windows Server 2003 x64 Editions if necessary. To determine whether BIOS update is required or not, visit the download si ...

10 5. Press the key while "Setup is inspecting your computer's hardware configuration.." is displayed in the upper part of the screen. TIPS • Pressing the key does not change the screen display. • When SATA HostRAID or SCSI HostRAID is used, a RAID drive m ...