Phonak EasyLink Operation & User’s Manual

File Specifications

Brand: Phonak
Category: Transmitter
Model: EasyLink (Operation & User’s Manual), prsFo5CZBffbs
File Info: Adobe Acrobat PDF (DjVu)
File Size: —
Pages: 36 pages

Download PDF

Download Phonak EasyLink Manual (36 pages)

Read Online:

Read the Phonak EasyLink Operation & User’s Manual online using the built-in PDF viewer. This document explains how to operate the device, adjust settings and perform regular maintenance.

Key Pages of Document

Plug the charging unit into

the power jack on the adapter marked Use only original Phonak charging units • The battery symbol in the EasyLink display flashes during charging. The battery cannot be over-charged. • The battery symbol stops flashing when the EasyLink is 100% charged. • EasyLink operates for approximately 10 hours when fully charged. • Make sure the socket outlet is easily accessible. ! � ...

Position EasyLink so

that people speak from the front into the microphones, not from the side or the back. Do not cover the microphone opening with your fingers when the EasyLink is in operation. It could affect the sound quality. ...

To switch on:

Press and hold the button for two seconds. To switch off: Press and hold the button again for two seconds. The display shows startup information during switch-on. When the EasyLink is ready, the following information appears: • FM channel number • Battery status ...

Using an external microphone

For an optimal speech quality, e.g., in educational situations in classroom and auditoriums, an external microphone can be attached to the EasyLink. Proceed as follows: Attach the adapter to the EasyLink, then plug the microphone cable into the microphone socket of the adapter. Hand the EasyLink to your conversation partner. Lift the clip to secure iLink on clothing. � � ...

Setup of FM receivers

Users of iLink or Phonak hearing instruments should check recommended settings of the FM receivers in the respective hearing instrument user guide. Principal benefits of MicroLink receivers Default channel iLink and MicroLink receivers are programmed with a default channel which activates at startup. It can be modified at Phonak service centers. Channel synchronization EasyLink can change your iLink or MicroLink receiver channel directly “over the air” within a distance of 10–20 cm (4–8 inches). This feature ensures EasyLink and the iLink or MicroL ...

Phonak EasyLink user guide recommended for: Audéo, Roger BaseStation, MSF0001 MicroField, SoundPilot2, Nathos.

⚠️ Download Safety

The Transmitter Operation & user’s manual (36 pages) is completely safe to download (last scan date: 30/06/2026).

Related PDF Instructions for Phonak EasyLink:

Transmitter Equipment: Frequently Requested

Have some Questions about Phonak EasyLink Device?

Get valuable and actionable advices from other Phonak EasyLink device users. Describe your problem or question, regarding the using of EasyLink, in as much detail as possible, and other users will be able to answer you.