Pioneer VSX-609RDS Operating Instructions Manual

DO NOT OPEN CAUTION IMPORTANT 1 CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenanc ...

Set up Operation Features........................................................................................4 Introductory Information ............................................................5 Checking the Supplied Accessories .............................................................................. 5 Using this Manual .. ...

This is the latest and most widely used digital theater system for cinemas throughout the world. The decoder has been incorporated into this receiver and is able to achieve high sound quality as well as produce dynamic surround sound effects. Manufactured under license from Digital Theater Systems, Inc. ...

FM wire antenna VSX-609RDS: AA size IEC R6P batteries (x2) VSX-709RDS: AA size IEC LR6 batteries (x2) Using this Manual The following symbols are used throughout this manual: Provides detailed precautions and advice on operations, etc. Indicates that display is blinking. This manual is for t ...

The remote control may not work properly if: ¶ There are obstacles between the remote control and the receiver’s remote sensor. ¶ Direct sunlight or fluorescent light is shining onto the remote sensor. ¶ The receiver is located near a device that is emitting infrared rays. ¶ The receiver i ...

Use audio cords (not supplied) to connect the audio components. Cassette deck placement Depending on where the cassette deck is placed, noise may occur during playback of your cassette deck which is caused by leakage flux from the transformer in the receiver. If you experience noise, move the cassette deck farther away from the rece ...

8 En Video Components Connect your video components to the jacks as shown below. Regarding digital video components (like a DVD player), you must use the analog connections pictured on this page for the video signal but in order to use a digital source you should hook up their audio to a digital input (see the next page). It is also ...

9 En Set up Digital Components In order to hear PCM/Dolby Digital/DTS soundtracks you need to make digital audio connections. You can do this by either coaxial or optical connections (you do not need to do both). The quality of these two types of connections is the same, but since some digital components only have one type of digita ...

10 En Example of connection using a DVD/LD or LD player When playing an LD recorded in Dolby Digital To connect a DVD/LD or LD player with its 2RF output, a commercially available RF demodulator (RFD-1) is required. The RF demodulator changes the digital signal to a form which can be processed by the VSX-709RDS/ VSX-609RDS models th ...