Planet ADE-4301A Operation & User’s Manual
Read Online
Read the Planet ADE-4301A Operation & User’s Manual online using the built-in PDF viewer.
Key Pages of Document
publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of PLANET. PLANET makes no representations or warranties, either expressed or impl ...
This equipment complies with all the requirements of DIRECTIVE 1999/5/CE OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 9 March 1999 on radio equipment and telecommunication terminal Equipment and the mutual recognition of their conformity (R&TTE) The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommu- nications Terminal Equipment and Satellite Earth Station Equipment) As of April 8,2000. Safety This eq ...
CHAPTER 1 INTRODUCTION ...................................................................................... 1 ADE-4301/ADW-4301 Features............................................................................. 1 Package Contents................................................................................................. 3 Physical Details.......................................................................................... ...
CHAPTER 8 MODEM MODE ...................................................................................... 89 Overview .............................................................................................................. 89 Management Connections ................................................................................. 89 ...
tures and capabilities. Congratulations on the purchase of your new ADE-4301/ADW-4301. The ADE- 4301/ADW-4301 is a multi-function device providing the following services: • ADSL 2/2+ Modem. • Shared Broadband Internet Access for all LAN users. • Wireless Access Point for 802.11b and 802.11g Wireless Stations. (ADW- 4301 only) • 4-Port Switching Hub for 10Base ...
2 • Auto-detection of Internet Connection Method. In most situations, the ADE-4301/ADW-4301 can test your ADSL and Internet connection to determine the connection method used by your ISP. • Fixed or Dynamic IP Address. On the Internet (WAN port) connection, the ADE-4301/ADW-4301 supports both Dynamic IP Address (IP Address is allocated on connection) and Fixed IP Address. Advanced Internet Functions • Applicatio ...
check the MAC address (hardware address) of Wireless stations to ensure that only trusted Wireless Stations can access your LAN. • Simple Configuration. If the default settings are unsuitable, they can be changed quickly and easily. LAN Features • 4-Port Switching Hub. The ADE-4301/ADW-4301 incorporates a 4-port 10/100BaseT switching hub, making it easy to create ...
4 • Quick Installation Guide • User’s Manual CD • Power Adapter • 1 RJ-45 Cable • 1 RJ-11 (ADSL) cable ...
Figure 2-1: Front Panel of ADE-4301 Front-mounted LEDs of ADW-4301 Figure 3-2: Front Panel of ADW-4301 PWR LED On - Power on. Off - No power. STATUS LED Off - Normal operation. Blinking - This LED blinks during start up, and during a Firmware Upgrade. LAN LED For each port, there are 2 LEDs, to indicate the connection speed (10BaseT or 100BaseT) of each port. • 100 LNK/ACT - This will be ON i ...
6 ADSL LED On - ADSL connection is available. Off - No ADSL connection available. Flashing - Data is being transmitted or received via the ADSL connection. ...
Figure 4: Rear Panel of ADW-4301 Power port (12V DC) Connect the supplied power adapter here. POWER button A switch to power on or power off. Just provided by ADW-4301. 10/100BaseT LAN connec- tions Use standard LAN cables (RJ45 connectors) to connect your PCs to these ports. Note: Any LAN port on the ADE-4301/ADW-4301 will automatically function as an "Uplink" port when required. Just connect any ...
4301. Requirements • Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors. • TCP/IP protocol must be installed on all PCs. • For Internet Access, an Internet Access account with an ISP, and a DSL connec- tion. • To use the Wireless Access Point, all Wireless devices must be compliant with the IEEE 802.11g or IEEE 802.11b specifi ...
• The PWR LED should be ON. • The STATUS LED should flash, then turn Off. If it stays on or blinking after 60 seconds, there is a hardware error. • For each LAN (PC) connection, one of the LAN LEDs should be ON (provided the PC is also ON.) • The WLAN LED should be ON. (ADW-4301 only) • The ADSL LED should be ON if ADSL line is connected. For more information, refer to Front-mounted LEDs in Chapter 1. ...
Overview This chapter describes the setup procedure for: • Internet Access • LAN configuration • Wireless setup (ADW-4301 only) • Assigning a Password to protect the configuration data. PCs on your local LAN may also require configuration. For details, see Chapter 4 - PC Configuration. Other configuration may also be required, depending on which features and functions ...
and configure it, using your Web Browser. Your Browser must support JavaScript. The configuration program has been tested on the following browsers: • Netscape V4.08 or later • Netscape 7 • Internet Explorer V5.01 or later Preparation Before attempting to configure the ADE-4301/ADW-4301, please ensure that: • Your PC can establish a phys ...
12 If you can't connect If the ADE-4301/ADW-4301 does not respond, check the following: • The ADE-4301/ADW-4301 is properly installed, LAN connection is OK, and it is powered ON. You can test the connection by using the "Ping" command: • Open the MS-DOS window or command prompt window. • Enter the command: ping 192.168.0.1 If no response is received, either the connection is not working, or your PC's IP address ...
Type Details ISP Data required Dynamic IP Address Your IP Address is allocated automatically, when you con- nect to you ISP. a) ADSL parameters (VPI and VCI) may be required, if they cannot be detected automati- cally. b) Some ISP's may require you to use a particular Hostname or Domain name, or MAC (physical) address. Static (Fixed) IP Address Your ISP allocates a perma- nent IP Address to you. Usually, the connection is " ...
14 Home Screen After finishing the Setup Wizard, you will see the Home screen. When you connect in future, you will see this screen when you connect. An example screen is shown below. Figure 5: Home Screen Main Menu The main menu, on the left, contains links to the most-commonly used screen. To see the links to the other available screens, click "Advanced" or "Administration". The main menu also contains two (2) buttons ...
shown below. Figure 6: LAN Screen Data - LAN Screen TCP/IP IP Address IP address for the ADE-4301/ADW-4301, as seen from the local LAN. Use the default value unless the address is already in use or your LAN is using a different IP address range. In the latter case, enter an unused IP Address from within the range used by your LAN. Subnet Mask The default val ...
