Sony KZ-32TS1U Operating Instructions Manual

do not expose the TV to rain or moisture, RiSK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRiQUE, NE PAS OUVRiR PRECAUCION RtESGO DE CHOQUE ELECTRICO NO ABRIR CAUTION : TO REDUCE THE RiSK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS iNSiDE REFER SERVICING TO QUAUFtED SERVtCE PERSONNEL This symbol is intended to alert the user to the presence of uni ...

Table of Contents ÷ Installing and Connecting the TV Unpacking .......................................................... 4 Inserting Batteries into the Remote Control ... 4 Preventing the TV from Falling Down ............ 4 Connector Types ................................................ 5 Identifying Front and Rear Connectors .......... 6 Basic Connections (Connecting Cable TV or Antenna) ...................................... ...

following: Remote control(1) and 75-ohmcoaxialcable size AA batteries(2) (1) Preventing the TV from Falling Down Attach the supplied bracket to the rear of the TV, and pass a sturdy cord or chain and attach it to a wall or pillar. Consult your dealer when attaching the bracket, since the screws for the bracket also hold the rear cabinet in a place. 4 / Remove one of the screws attached at t ...

securely to each bracket on the rear of the TV. Installing and Connecting the TV Connector Types You may find it necessary to use some of the following connector types during set up. Supplied 7f-ohm coaxial cable Screw-on type Screw into connection. S VIDEO cable High quality video cable for enhanced picture quality Align guides and push into connection. AUDIO/VIDEO cable ÷ 5 Attach the cord or chain to a wall or p ...

÷ II Identifying Front and Rear Connectors TV front panel Under the panel _ O Rear of TV ÷ _oooooooooo _j oo_oooooooo° AC IN ÷ 6 (us) I I 01US03GET+UC(4W)p65 6 KZ-32/42TS1U 4-087-364-13 (1) ÷ 2002.622, 3:14 PM II ...

If your headphones do not match the jack, use a suitable plug adaptor (not supplied). VIDEO IN 1, 2 (pages 8 - 10, 13) Connects to the output jacks of your VCR or other video equipment. COMPONENT VIDEO IN 1 (pages 12, 14) Connects to the component video (Y, P,_,P_0 and audio (L/R) output jacks of your DVD player or digital TV receiver. AUDIO OUT (page 11) Connects to the input jacks ...

4, Connecting a VCR and Cable Use this hookup if: • You have cable TV that does not require a cable box. Disconnect all power sources before making any connections. 1 Connect the cable TV cable to the VCR's IN jack. 2 Using the supplied 75-ohm coaxial cable, connect the VCR's OUT jack to the TV' s VHF/UHF jack. 3 Using AUDIO and S VIDEO cables, connect the VCR's Audio and S Video OUT jacks to the TV's AUDIO and S VID ...

the TV Connecting a Satellite Receiver Disconnect all power sources before making any connections. 1 Connect the satellite antenna cable to the satellite receiver's SATELLITE IN jack. 2 Using AUDIO and S VIDEO cables, connect the satellite receiver's AUDIO and S VIDEO OUT jacks to the TV's AUDIO and S VIDEO IN jacks. 3 Connect the supplied 75-ohm coaxial cable from your cable or antenna to the TV' s VHF/UHF jack. Rear of ...

4, Connecting a Satellite Receiver with a VCR Disconnect all power sources before making any connections. 1 Connect the satellite antenna cable to the satellite receiver's SATELLITE IN jack. 2 Connect the CATV cable to the VCR's VHF/UHF IN jack. 3 Using the supplied 75-ohm coaxial cable, connect the VCR's OUT jack to the TV's VHF/UHF jack. 4 Using AUDIO and S VIDEO cables, connect the satellite receiver's AUDIO and S V ...

the TV Connecting an Audio Receiver Disconnect all power sources before making any connections. Using an AUDIO cable, connect the TV's AUDIO OUT jacks to the audio receiver' s AUDIO IN jacks. ÷ Rear of TV A; i ii i _j Audio reciever (DAY-S800 etc) AUDIO-R (red) ---_ _---- AUDIO-L _ (white) {,._-_ RK-74A (not supplied) ,n0u,°°4 When using your audio system speakers Set "Speaker" to "Off" on the _ (Custom Setup) menu. So ...

4, II Connecting a DVD Player with Component Video Connectors This is the preferred hookup to use if: • Your DVD player has component (Y, B-Y, R-Y) jacks. Disconnect all power sources before making any connections. 1 Using three separate component video cables, connect the DVD player's Y, B-Y and R-Y jacks to the Y, P_ and P_ jacks on the TV. Use the COMPONENT VIDEO IN 1 connections. Tip The Y, B-Y and R-Y jacks on y ...

the TV Connecting a DVD Player with A/V Connectors Use this hookup if: • Your DVD player does not have component (Y, P_, PR)jacks. Tip If your DVD player has video component oulput connectors: for best picture quality use the connection described on page 12. Disconnect all power sources before making any connections. 1 Using an AUDIO cable, connect the DVD player's AUDIO OUT jacks to the TV's AUDIO IN jacks. 2 Using an ...

÷ II Connecting a Digital TV Receiver Disconnect all power sources before making any connections. 1 Using three separate component video cables, connect the Digital TV Set-top box's Y, P_ and PR.jacks to the TV. Notes • The Y, P_ and P_ jacks do not provide audio, so audio cables must be connecled to provide sound. • Component vMeo (Y, P_, P_) connection is necessary m view 480i, 720p, and 1080i formats. Note thai ...

the TV Connecting a Sub Woofer Disconnect all power sources before making any connections. Using a monaural audio cable, connect the TV's SUB WOOFER jack to the sub woofer's input jack. Rear of TV ÷ r Sub woofer input Sub woofer (SA-WD200 etc.) 0 I SUB WOOFER Monaural audio cable (not supplied) ÷ {us)15 I I 01USO4CON-UC(8+t 9) p65 15 ÷ 2002622, 3:13 PM KZ-32/42TS 1U 4-087-364-13 (1) II ...

4, II Connecting an RGB Equipment Disconnect all power sources before making any connections. 1 Using an RGB cable, connect the RGB equipment's video/synchronized signal output terminal to the Y/G, PdB, PR/R, HD, and VD jacks on the TV. Use the COMPONENT VIDEO IN 2/RGB IN connections. 2 Using an AUDIO cable, connect the RGB equipment's AUDIO OUT jacks to the TV's AUDIO IN jacks. Be sure to use the same row of inputs th ...

After you finish connecting your TV, you can run Auto Program to set up your channels. The Auto Program screen appears when you turn your TV on for the first time after installing it. To change or skip channels, see page 19. Note The Auto Program feature does not apply for an installation that uses a cable box for all channels. Installing and Connecting the TV 1 Press Power on the front panel of your TV. The Auto Setup menu ap ...

To watch CATV channels You have to subscribe to a cable TV company. Note that cable TV cannot be received in some areas. This TV receives 1-125 cable TV channels. For details on cable TV subscription, consult your nearest cable TV company. 1 Press MENU. 2 Press _/_ to select'q'(TVSetup), then press (SD 3 Press_/lto select"Cable," then press(Z). 4 Press_/lto select"On," then press (i)- 5 Perform steps 3and 4 on page 17. ...

Menu Language Yon can select the language to be displayed in all menu. 1 Installing and Connecting the TV Press MENU. MENU Picture/Sound Control Picture Mode : _=IA0,.t Soun0 L'v°°l Adjust Picture d_ •_ _,_ to select, _,8 to enter adj menu 2 Press 4"/!!,to select [_ (initial Setup), then press @ Inif_n[ £_hln D Color System : G N e _,_ to select, _,N to sel 3 Press e/l to select"Language,"then press@. S e q- Irtitia ...

STANDBY/ SLEEP 1 2 Press POWER on the remote. POWER Tip When the STANDBY/SLEEP indicator goes off, press POWER on the TV. Select the desired channel using the 0-9 and ENTER buttons. Press 0-9 to select a channel, the channel changes after 2 seconds. Press ENTER to select immediately. Use the CH +/- buttons to scan through the channels. OH ÷ MUTING 1 OFF or Tip When you press and hold CH + or - the channel number will change rapidly. 3 A ...