Plextor ULTRA-D Manual 

Plextor’s Technical Support Department. Learn what information you should gather before contacting Plextor’s Technical Support Department. YOUR OBJECTIVE: Know how to get in contact with Plextor if you experience any problems installing or o ...

There are four ways for you to contact Plextor’s Technical Support Department: 1) Send us e-mail at [email protected] or visit our Web site for answers to frequently asked questions. 2) Log on to our BBS (2,400/9,600/14.4/28.8/MNP, V.42bis) at 408-986-1569. You will find a great deal of useful information and software on our BBS. It includ ...

 Brand name and model number of any other peripherals you have installed/ connected to your computer (e.g., scanner, fax board, network board). Returns You must receive an RMA (Returned Materials Authorization) number from our Technical Support Department before any Plextor CD-ROM drive can be re ...

CD-DA; CD-ROM Mode 1; CD-XA Mode 2, Form 1 & 2; CD-XA Mode 2, Form 1 & 2; Multi-session Mode 1 & 2 Multi-session Mode 1 & 2 Disc Type ISO 9660-HFS; Rockridge; ISO 9660-HFS; Rockridge; PhotoCD; Video CD; CD-I; PhotoCD; Video CD; CD-I; CD-Extra (CD-Plus); CD-Extra (CD-Plus); ...

AC 100-240V 50/60 Hz Power Switch ---- Tumbler Type: 3A, 250V Interface Connector SCSI, 50-Pin SCSI, Two 50-Pin Header Type High-density Connector Audio Output Analog Output, Analog Output, RCA Jacks Molex Connector (P/N 50083-8014 4-pin) Use Molex Housing (P/N 51030-0430 4-pin) Jumper Switches SCSI I ...

and Installation Guide Quick Install Windows 95 should automatically recognize and support your SCSI controller and Plextor CD-ROM drive. Microsoft has included a generic CD-ROM device driver in the operating system. They have also included numerous controller specific drivers on the Windows 95 CD-ROM. If you connect your Plextor drive to ...

controller must also be SCAM capable. It may sound like a con game, but actually SCAM stands for SCSI Configured Auto Magically (sure it sounds hokey, but we didn’t make it up). Others may refer to it as SCSI Configured AutoMatically. Any combination of up to seven internal ...

you are trying to accomplish. Review the following descriptions and then go to the appropriate section of this manual. 1) You have purchased a new SCAM capable Plextor CD-ROM drive kit with a SCAM capable SCSI controller. If you purchased jus ...

Install Hardware You should be able to simply install your SCSI controller, CD-ROM drive, and all cabling without any concern for things like SCSI ID selection. First, turn off your computer system, then review Chapter 8. You should also familiarize yourself with the chapter on Termination. However, the quick solution here is to pl ...

Reboot your machine by selecting ‘‘SHUT DOWN’’ from the START Button. In the shut down dialog box select ‘‘Restart the Computer’’ and select ‘‘YES.’’ This will reboot your computer with the new configuration. As your system goes through all its self checks, you might find it interesting to watch the display and no ...