Polaroid TTM-2420 Operation & User’s Manual
Text of the manual
2. To avoid the fire, no naked flame
source, such as lighted candles,
should be placed on the apparatus;
3. At least 10 cm space should be left
around the apparatus for sufficient
ventilation;
5. In case of smoke, strange noise or
strange smell from the unit, switch it
off, unplug it from the wall outlet and
contact your dealer or service cen-
ter.
2. Unplug
5. Do not place this apparatus near water,
for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub, in a wet
basement, a swimming pool, and the
like.
7. Unplug this apparatus from the AC out-
let before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a
damp cloth for cleaning;
9. Place the apparatus in such a position
that the s
External connection 6
Remote control
8
Basic operation
10
Menu Basic operation
12
Using the PICTURE menu
12
Using
Overview of the function keys
Please observe the function keys on the TV and refer to the
following diagram to learn every function key.
Note: Buttons for SA-U series TV may have different position for different
models, but the same button has same function. Figure mentioned
above is for model TTM-2420.
Overview
POWER SWITCH
POWER I
HEADPHONE OUTPUT JACK
L
R
Overview
Overview of the back AV jacks
Please observe the AV jacks on the back of TV, and refer to the following
diagram to learn the function of every jack.
Note: Different model may have different jack. Please refer to¡°SA-U series
color TV Functions table¡±in page 21 for your model.
Side
The antenna input impedance used in this model is 75ohm, just connect 75ohm
coaxial cable of VHF/UHF antenna to the antenna jack on the back of TV directely. If
you use 300 flat feeder, you need connect it with one 300 /75ohm converter first, then
connect the converter into the antenna jack.
Note:
It is recommended to use 75ohm
Different model may have different jack. Please refer to¡°SA-U series
color TV Functions table¡±in page 21 for your model.
.If your model has side AV jacks or headphone jack, please connect as the
following figure shown:
To AUDIO output (Red)
To VIDEO output (Yellow)
(White)
VTR without S-VIDEO
(Red)
(White)
(Yellow)
Headphone
Connect to vid
VOLUME UP/MENU VALUE UP
PROGRAM DOWN/MENU SELECT
SLEEP
BROWES
CLEAR
SOUND
CCD
VOLUME DOWN/MENU
VALUE DOWN
PROGRAM UP/
MENU SELECT
DIGITAL, LETTER
INPUT BUTTONS
CALENDAR
DISPLAY
Mute button
Lowers the volume to its minimum level.