GE Microwave Oven Installation Instructions
Text of GE Microwave Oven Installation Instructions
3/32" Drill Bit
Electric
GE Microwave Oven 3. Connecttheovenneutral(white)leadto thebranch
circuit neutral(whiteor gray)In accordancewith
localcodes.
4. Connecttheovenredleadto thebranchcircuitred
leadand theovenblackleadto the branchcircuit
black leadIn accordancewith localcodes, ff the
residenceredandblackleadsarealuminumconduc-
tors,see"WARNING"notebelow.
NOTE TO ELEI_'RICIAN= The 3 powerleads
supplied with this appliance are U.L recognized for
connection to larger gauge household wiring.
The
In
thebottomoftheunit. The lower front trim and end caps
are shipped
separately and should not be used until you
are ready to Install the oven with door removed after
making electrical connections.
Sse Stop 3.
Step
1:
Remove
the
oven
door,
Open the door to the stop position (See Fig. 2A).
Grasp the door at each side and lift up and off the
hinges (See Fig. 2B).
Fig. 2A
CAUTION=
When
the
door
is
removed
and
hinge
Slide oven 3/4 way Into the cabinet
cutout.
Attach lower end caps and trim to front frame with 3
screws provided (See Fig. 4).
NOTEI
End caps snap Into side trim.
Fig. 4
SIDE
END
CAP
SCREW/'_
Step
5i
Mount the oven with the screws supplied.
Replace oven door and 3 top trim screws.
To replace
top trim,
hook either side of top trim and
pivot trim around into the three rstalnlng clips snapping
the trim Into place (See Fig. 5).
Step
6:
TO replace
the
o