Precor C954 Owner's Manual
Text of Precor C954 Owner's Manual
Precor C954 Commercial Treadmill Owner’s Manual
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
C954
C956
When using the C956 or C954 treadmill, always follow basic precautions, including the following:
•
To ensure your safety and to protect the unit, read all the instructions before assem-
bling and using the treadmill.
•
To ensure the proper use and safety of the treadmill, make sure that all users read
this manual. Please make this manual a part of your club’s training program.
Remind the club
Never step off the treadmill while the running belt is moving. Keep your body and
head facing forward. Never attempt to turn around on the treadmill.
•
Never turn ON the treadmill when someone is standing on the machine.
•
Never block the air openings on the hood while operating the treadmill. Keep the air
openings clean and free of lint, hair, or anything that might impeded the free flow o
Important Safety Instructions ..........................................2
Safety Approval .....................................................................
3
Grounding Instructions ...........................................................
3
Radio Frequency Interference (RFI) ........................................
6
European Applications ......................................................
Table of Contents
The C956/C954 Display ..................................................25
Features on the Display Console............................................ 25
Top Display Windows.............................................................. 26
Upper Display (C956 only) ...................................................... 26
Center Display (C956 and C954) .............................
RADIO FREQUENCY INTERFERENCE (RFI)
Federal Communications Commission Part 15
The treadmill has been tested and found to comply with:
•
The IEC EMC Directive (international electromagnetic compatibility certification)
•
The limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a commer
Do not attempt to service the treadmill yourself except for the maintenance tasks
described in this manual. The treadmill does not contain any user-serviceable parts.
For information about product operation or service, visit the Precor Web Site at
www.precor.com or contact an authorized Precor Commercial Products Customer
Service Representative at 1-888-665-4404.
To help customer
Precor C954 Thank you for purchasing the Precor C956 or C954 treadmill. Built to the exacting
standards of the health club environment, the treadmill is intended for commercial
use and can withstand the rigors of daily club use with little maintenance.
Important: Before using the treadmill, we urge you to familiarize yourself and
your staff with the entire Owner’s Manual. Understanding this manual will help
After unpacking the treadmill, open the hardware kit and make sure that you have
the following items shown in Diagram 2.
K
(A) twelve 1-inch buttonhead hex screws
K
(B) twelve flat stainless steel washers — place on 1-inch buttonhead hex screws
K
(C) four 1/2-inch flat head hex screws — attach to upper handrails
K
(D) four 3 1/4-inch socket head screws — install upright supports
You do not need any special knowledge or experience to set up the treadmill.
However, because of its size and weight, you will need to obtain assistance.
INSTALLATION REQUIREMENTS
Follow these installation requirements when installing the treadmill. If you do not
install the treadmill according to the following guidelines, you could void the Precor
limited warranty.
•
Set up the treadmill on a s
Precor C954 Lift the unit by
grasping the
hand holds
inside the rear
end caps.
Lift the rear of the
unit and roll it to
its assembly
location.
Rear end cap
3.
Move the treadmill. Diagram 3. Grasp the hand holds inside the rear end
caps and use proper lifting techniques to lift the rear end so that you can roll
the treadmill on its front wheels. To avoid injury to yourself or damage to the
unit, ask
Attach the left side upright support. Diagram 5. Take the following steps.
a. Remove the shipping fasteners from the front panel. With the supplied hex
key and a ½-inch box end wrench, loosen and remove the two bolts, washers
and nuts on the left side of the front panel. These fasteners hold the front
panel in place during shipping. (The front panel will drop slightly when you
remove the faste
Precor C954 CAUTION: To avoid damage to the display cable, read the following steps
carefully. Damage to the cable due to improper assembly is not covered
by the Precor limited warranty.
6.
Secure the display console to the left upright support. Diagram 7. Remove
any tape or wire ties that secure the display cable. Unwrap the cable to remove
kinks. Ask an assistant to hold the display console in place while y
b. Route the display cable through the right upright support. Ask an assistant to
hold the upright support close to the right side mounting bracket. Route the
cable through the upright support (see Diagram 9, #1) and pull it out of the
large hole on the side of the support near its base. Diagram 9, #2.
Note: If you encounter difficulties with the cable, try tying a string to the
end of the cable.
Secure the upright support. Diagram 11, #1. Obtain two screws (D), washers
(E) and barrel spacers (F) from the Hardware kit. Place a washer and barrel
sleeve on each bolt and insert the fasteners through the side of the upright
support and into the base mounts. Secure the upright support using the 1/4-inch
hex key. See Diagram 11, #3.
Important: Do not securely tighten the screws until after th
Important: With the handrails attached, the width of the treadmill is 33½
inches (85 cm). It will not fit through a standard 32-inch doorway.
11. Attach the handrails. Diagram 13. For ease of assembly, place the side rails
or adjustable rear feet on blocks. Obtain assistance to lift the treadmill. Do
not place blocks beneath the running bed.
To attach the handrails, perform the following steps on
12. Replace the hood. Diagram 14. Reposition the hood on the treadmill and replace
the four buttonhead screws removed in step 4. The two screws with washers are
placed through the front panel. Tighten the screws using the 3/16-inch hex key.
13. Tighten all mounting screws with the hex keys provided. Diagram 14.
Start at the front of the treadmill with the four screws that attach the upright
suppor
15. Adjust the rear deck. Diagram 16. To raise the rear deck, situate yourself
next to the adjustable rear foot. Ask an assistant to lift the rear of the tread-
mill slightly while you turn the adjustable rear foot clockwise. Turning the rear
foot counterclockwise lowers the unit.
CAUTION: The treadmill requires a dedicated, grounded circuit. A 20 amp
dedica
CHECKING THE ALIGNMENT OF THE RUNNING BELT
The belt is aligned at the factory before shipment. However, during shipment or by
using the treadmill on an uneven surface, the belt might move off center. Proper
belt alignment is important because it allows the belt to remain centered and
assures smooth operation.
Follow these steps to check the alignment:
1.
The treadmill has adjustable rear feet. Che