Primare A20 Operation & User’s Manual

Text of Primare A20 Operation & User’s Manual

R I G H T A N D A C K N O W L E D G M E N T S

ht © 2000 Primare Systems AB. All rights reserved. Systems AB n 17D 46 Växjö rmation in this guide is believed to be correct as of the date of on. However, our policy is one of continuous development and so the on is subject to change without notice, and does not represent a ment on the part of Primare Systems AB. is a trademark of Primare Systems AB. All other product names are rks or registered trademark

M E T O T H E A 20 I N T E R G R AT E D

R .................................................................. (1 H E A 20 W I T H O T H E R P R I M A R E T S ................................................................ (1 C A L S P E C I F I C AT I O N ............................. (2 A20 Integrated Amplifier A N E L C O N T R O L S .................................. (3 A N E L D I S P L AY .....................................

Welcome to the Primare A20 Integrated Amplifier! This chapter introduces you

to its key features, and explains how you can take advantage of its superb sound as the key component in your hi-fi system. M E T O T H E A 2 0 I N T E G R A T E D A M P L I F I E R n integrated preamplifier and power amplifier with extraordinary for its price. ormance power amplifier orporates a power amplifier providing 70 Watts per channel of y sound. puts am

N I C A L S P E C I F I C AT I O N

ower per channel 2 x 70W into 8Ω, 2 x 110W into 4Ω terminals 4 –16Ω mpedance <0.08Ω <5mV ts 330mV puts 300mV y response <10Hz – 100kHz, -3dB 0.08% (1kHz, 10V into 8Ω) -noise, line -98dB (A-weighted) nsumption, standby <16W rent ±20A ns (WxDxH) 430 x 275 x 95mm 11kg

Using the A20 Integrated Amplifier

This chapter explains how to operate the A20 Integrated Amplifier, using either the front panel controls or the C30 Remote Control. ]A The STANDBY button switches the A20 to standby, or switches it on from standby. ]B The input selector buttons select one of the four source inputs. ]C The VOLUME control changes the volume. A N E L C O N T R O L S ons of the A20 Integrated Amplifier can be accessed using the five ush bu

A20 Integrated Amplifier

T P A N E L D I S P L AY wing illustration shows the information on the front panel display: 57 V ]B ]A ume setting. rently selected input. the front panel display the DIM button on the remote control. lay will dim to show just the currently selected source. ore the normal display the DIM button again. S W I T C H I N G O N A N D O F F To switch on • Use the switch under the left-hand edge of the front panel. During normal
Using the A20 Integrated Amplifier 5 N G A S O U R C E grated Amplifier provides a choice of four line inputs, labelled: LINE 1, and LINE 2. source button corresponding to the source you want to select until the he source is displayed on the front panel display. 23 V ely, press the SEL A or SEL V buttons on the C30 Remote step between sources. N G T H E V O L U M E ows you to vary the volume from 0 (silence) to 79 (maximum the volume volume contro

Primare Amplifier Owners Instructions: