Primare I32 Operation & User’s Manual
Text of Primare I32 Operation & User’s Manual
I 3 2 U S E R G U I D E
XLR 1
RS232
XLR 2
RCA 3-5
Record Preamp
IR in/out
Speaker (R)
Speaker (L)
Power
On/off
Trigger
out
Not
available
Optional media module;
see Media module, opposite page.
Analogue inputs
Analogue outputs
Welcome!
Welcome to the Primare I32! Your I32 is a high-quality integrated amplifier,
designed as the ideal centrepiece of a home hi-fi system.
I 3 2 U S E R G U I D E
1 U n p a c k t h e I 3 2
Your I32 is supplied with the following
components:
• Mains cable.
• IR cable.
• Trigger cable.
• C23 remote control.
• Two batteries for the remote control.
If any of these items are missing please contact
your supplier. We recommend you retain the
packaging in case you need to transport the unit
at a later date.
2 C o n n e c t s p e a k e r s
The I32 is designed to be connected di
I 3 2 U S E R G U I D E
Using the I32
This page explains how to operate your I32, using the functions available from the
front panel or C23 remote control.
F r o n t p a n e l
c o n t r o l s
Volume
Changes the volume.
Standby O
Switches the I32 to standby, or switches it on from
standby.
Menu @
Press and hold to display the settings menu.
Select R
In the settings menu: Edits a setting.
Cancel
In the settings menu: Cancels editing a setting,
or saves
I 3 2 U S E R G U I D E *
Using the remote control
F i t t i n g t h e
b a t t e r i e s
Before using the remote control you need to
insert the two AAA batteries supplied with the
C23.
• Gently slide open the cover on the back of
the remote control:
• Insert the two batteries, observing the
polarity printed on the bottom of battery
compartment:
• Slide back the cover until it clips into place:
Note: Replace only with alkaline
batteries type
I 3 2 U S E R G U I D E +
Configuring the settings
The I32 includes a General settings menu that allows you to customise the inputs
to suit the sources in your system. It also allows you to configure general aspects
of the I32’s operation.
U s i n g t h e s e t t i n g s
m e n u
To display the settings menu
• Hold down the @ button on the front panel,
or press the MENU button on the remote
control.
The settings menu is displayed:
General settings
I 3 2 U S E R G U I D E ,
C u s t o m i s i n g t h e
v o l u m e a n d b a l a n c e
The settings menu also allows you to customise
the start-up volume and balance, set when you
turn the I32 on from standby, and the maximum
volume.
To set the start-up volume
Set the Volume default setting to the volume
you want to use:
General settings VOL 10
Master bal 00 LR 00
Volume default
25
Volume max
79
To set the start-up balance
Set the Master bal setting
I 3 2 U S E R G U I D E -
F e a t u r e s
Ultra Fast Power Device (UFPD) Class-D
Amplifier
26dB constant loop gain in the entire audio range
Power Factor Control (PFC) power supply
S p e a k e r O u t p u t s
Power
2 x 120W / 8Ω, 2 x 230W / 4Ω
A n a l o g u e o u t p u t s
Preamplifier output
RCA, 94Ω impedance.
Record output
RCA, 94Ω impedance.
I n p u t s
Balanced inputs
2 XLR, 36kΩ impedance.
Unbalanced inputs
3 RCA, 36kΩ impedance.
P e r f o
I 3 2 U S E R G U I D E .
CAUTION: To reduce the risk of electrical shock
do not remove cover (or back). No user serviceable
parts inside. Refer servicing to qualified service
personnel.
WARNING: To reduce the risk of fire or electrical
shock, do not expose this apparatus to rain or
moisture.
CAUTION: In Canada and the USA, to prevent
electric shock, match the wide blade of the plug to
the wide slot in the socket and insert the plug fully
into the socket