Pro-Form Power 995 Operation & User’s Manual

Text of Pro-Form Power 995 Operation & User’s Manual

Model No. PFTL99910.0

Serial No. Write the serial number in the space above for reference. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. QUESTIONS? If you have questions, or if parts are damaged or missing, DO NOT CON- TACT THE STORE; please contact Customer Care. IMPORTANT: Please register this product (see the limited warranty on the back cover of thi

TABLE OF CONTENTS

WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Before beginning any exercise program, con-

sult your physician. This is especially impor- tant for persons over age 35 or persons with pre-existing health problems. 2. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 3. Use the treadmill only as described. 4. Keep the treadmill indoors, away from mois- ture and dust. Do not put the treadmill in a garage or covere

20. Never leave the treadmill unattended while it

is running. Always remove the key, unplug the power cord, and press the power switch into the off position when the treadmill is not in use. (See the drawing on page 5 for the lo- cation of the power switch.) 21. Do not attempt to raise, lower, or move the treadmill until it is properly assembled. (See ASSEMBLY on page 6, and HOW TO FOLD AND MOVE THE TREADMILL on page 24.) You must be able to safely lift

Thank you for selecting the revolutionary PROFORM®

POWER 995 treadmill. The POWER 995 treadmill of- fers an impressive selection of features designed to make your workouts at home more enjoyable and ef- fective. And when youʼre not exercising, the unique treadmill can be folded up, requiring less than half the floor space of other treadmills. For your benefit, read this manual carefully before using the treadmill. If you have questions after read- ing

To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480.

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of the walking belt or the shipping

Identify the Left Upright (89), which is marked

with a “Left” sticker or an “L” sticker. Have a sec- ond person hold the Left Upright near the Base (94). See the inset drawing. Tie the wire tie in the Left Upright (89) securely around the end of the Upright Wire (81). Then, pull the other end of the wire tie until the Upright Wire is routed com- pletely through the Left Upright. 81 3 1. Make sure that the power cord is unplugged. Place a piece

Identify the Left Base Cover (82) and the Right

Base Cover (83). Slide the Left Base Cover onto the Left Upright (89). Slide the Right Base Cover onto the Right Upright (90). Do not press the Base Covers into place yet. Identify the Left Upright Cover (79) and the Right Upright Cover (80). Slide the Left Upright Cover onto the Left Upright (89). Slide the Right Upright Cover onto the Right Upright (90). 89 82 80 90 79 83 5 4. Hold the Left Upright (89

Attach the Left Handrail (88) to the Left Upright

(89) with two 5/16" x 1" Bolts (5), two 5/16" Star Washers (11), and a 5/16" x 1 1/4" Bolt (4). Do not fully tighten the Bolts yet. Attach the Right Handrail (87) in the same way. 7 89 88 87 4 4 5 5 11 11 6. Cut the plastic tie in the Left Handrail (88) and the Right Handrail (not shown). If necessary, press the 5/16" Cage Nuts (31) back into place. Identify the Left Handrail (88) and hold it near the

10. With the help of a second person, hold the con-

sole assembly near the Left Handrail (88). Connect the Upright Wire (81) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CON- NECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Remove the wire tie from the Upright Wire. Console Assembly Conso

12. Firmly tighten the four the 3/8" x 2 3/4" Bolts (7)

and the four 3/8" x 1 1/4" Bolts (8) (only one side is shown). Press the Left Base Cover (82) and the Right Base Cover (83) onto the Base (94) until they snap into place. 12 83 8 82 94 11. Set the console assembly on the Left Handrail (88) and the Right Handrail (87). Be careful not to pinch any wires. Insert the excess Upright Wire (not shown) into the Left Handrail. Attach the console assembly wi

14. Hold the Left Upright Cover (79) against the

console assembly. Align the holes in the Left Upright Cover with the holes in the Left Upright (89). Attach the Left Upright Cover with three #8 x 1/2" Screws (1). Attach the Right Upright Cover (80) to the Right Upright (90) in the same way. 14 89 1 Console Assembly 79 1 90 80 1 15. Attach the Left Tray (107) and the Right Tray (108) to the console assembly with four #8 x 1/2" Screws (1). 107 108 15 Cons

16. Make sure that there is a piece of cardboard

below the rear of the Frame (56). See page 15 and plug in the power cord. Next, see page 17 and turn on the power. The incline system will automatically calibrate and the Frame (56) will move upward and downward. If the incline system does not automatically cali- brate, manually calibrate the incline (see page 26). Then, press the Incline increase button once. When the Frame (56) stops moving, remove the

19. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic

on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 26 and 27). 18. Attach the Rear Feet (57) to the Frame (56) as shown with four #8 x

OPERATION AND ADJUSTMENT

THE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- icone spray or other substances to the walking belt or the walking platform. Such substances will cause excessive wear. HOW TO PLUG IN THE POWER CORD Your treadmill, like other electronic equipment, can be damaged by sudden voltage changes in your homeʼs power. To decrease the risk of damag

FEATURES OF THE CONSOLE

The treadmill console offers an impressive array of features designed to make your workouts more effec- tive and enjoyable. When you use the manual mode, you can change the speed and incline of the treadmill with the touch of a button. As you exercise, the con- sole will display instant exercise feedback. You can even measure your heart rate using the handgrip pulse sensor. In addition, the console features twenty onboard work- o

Pro-Form Treadmill Owners Instructions: