Pro-Ject Audio Systems Pre Box S Instructions For Use

Text of Pro-Ject Audio Systems Pre Box S Instructions For Use

© Audio Trade GmbH · Pro-Ject Pre Box S · Revision 2013.1.15

2 Dear music lover, thank you for purchasing a PRO-JECT AUDIO preamplifier. In order to achieve maximum performance and reliability you should study these instructions for use carefully. ! Warning of a hazard for the user, the unit or possible misuse. Important notice. Safety instructions ! AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the volt
© Audio Trade GmbH · Pro-Ject Pre Box S · Revision 2013.1.15 3 Mains power connection Connect the low voltage plug from the power supply to the Power 18V " socket before connecting the power supply to the mains. Remote control 1 ON/OFF turns the unit on or back into standby 0 _ VOL and 0 + VOL adjust the sound volume CH+ CH- VOL+ VOL- ON/OFF 0 _ CH and 0+ CH select the inputs Front panel controls Pre Box S To switch on from standby or to standby Th
© Audio Trade GmbH · Pro-Ject Pre Box S · Revision 2013.1.15 4 Replacing batteries Proceed as follows:  Unlock and slide open the battery case cover  Replace the battery. Make sure the battery is the right way round !  Close the battery case cover Battery type: 1 x CR2032 / 3V or 1 x CR2025 / 3V Do not dispose the batteries as ordinary domestic refuse. Please dispose your exhausted batteries at the appropriate collection sites - usuall

Pro-Ject Audio Systems Amplifier Owners Instructions: