Pro-Ject Audio Systems Stereo Box Instructions For Use

Text of Pro-Ject Audio Systems Stereo Box Instructions For Use

© Audio Trade GmbH · Pro-Ject Stereo Box · Revision 1.6.10/1.8.10

2 Dear music lover, thank you for purchasing a PRO-JECT AUDIO amplifier. In order to achieve maximum performance and reliability you should study these instructions for use carefully. ! Warning of a hazard for the user, the unit or possible misuse. Important notice. Help to protect the environment If you are not going to use the amplifier for an extended period of time, e.g. vacation, we

© Audio Trade GmbH · Pro-Ject Pre Box · Revision 1.6.10/1.8.10

3 Remote control 1 ON/OFF turns the unit on or back into standby. The blue LED on the front panel shows that the unit is powered on. 0 _ VOL and 0 + VOL adjust the sound volume CH+ CH- VOL+ VOL- ON/OFF 0 _ CH and 0+ CH select the inputs Front panel controls Stereo Box Power 1 Volume 2 Input Select Stand-By The switch marked Power (press and hold to switch into standby mode) on the front
© Audio Trade GmbH · Pro-Ject Stereo Box · Revision 1.6.10/1.8.10 4 Replacing batteries Proceed as follows: • Slide open the battery case cover • Replace the battery. Make sure the battery is the right way round • Close the battery case cover Battery type: 1 x CR 2032 / 3V Do not dispose the batteries as ordinary domestic refuse. Please dispose your exhausted batteries at the appropriate collection sites - usually located at supermarkets and drugs

Pro-Ject Audio Systems Amplifier Owners Instructions: