ProForm 1050 Bike Manual 

Serial No. Write the serial number in the space above for reference. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Keep this manual for future reference. To register your product and activate your warranty today, go to www.proformserv ...

This drawing shows the location(s) of the warning decal(s). If a decal is missing or illegible, see the front cover of this manual and request a free replacement decal. Apply the decal in the location shown. Note: The decal(s) may not be shown at actual size. PROFORM is a registered trademark of ICON IP, Inc. WARNING DECAL PLACEMENT ...

IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your exercise bike before using your exercise bike. ICON assumes no responsibility for personal injury or property damage sustained by or throu ...

exercise bike. Cycling is an effective exercise for increasing cardiovascular fitness, building endurance, and toning the body. The 1050 exercise bike provides a selection of features designed to make your workouts at home more effective and enjoyable. For your benefit, read this manual carefully before you us ...

(74)––4 5/16" x 3/4" Screw (63)––1 5/16" x 2 1/4" Screw (72)––1 #8 x 19mm Screw (62)––6 #8 x 1/4" Screw (70)––1 PART IDENTIFICATION CHART Use the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is the key number of the part, from the PART LIST near the end of this manual ...

Wheels (27). Attach the Front Stabilizer (22) to the Frame (1) with two 3/8" x 2 1/4" Screws (74). 2 22 27 27 74 1 •• To hire an authorized service technician to assemble this product, call 1-800-445-2480. •• Assembly requires two persons. •• Place all parts in a cleared area and remove the packing ...

with two 3/8" x 2 1/4" Screws (74). 74 23 1 3 4 1 47 3 Holes 4. Orient the Seat Post (3) as shown. Loosen the indicated Post Knob (47) and pull it outward. Then, insert the Seat Post (3) into the Frame (1). Move the Seat Post (3) upward or downward to the desired position, release the Post Knob (47) into ...

Locate the Seat Knob (29) on the Seat Post (3). Loosen the Seat Knob and pull it outward. Then, insert the Seat Carriage (4) into the Seat Post. Slide the Seat Carriage (4) to the desired position and then release the Seat Knob (29) into one of the adjustment holes in the Seat Carriag ...