ProForm PETL41106.0 Operation & User’s Manual

Text of ProForm PETL41106.0 Operation & User’s Manual

Model No. PETL41106.0

Serial No. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. USER'S MANUAL QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction. If you have questions, or if there are missing or damaged parts, please call: or write: ICON Health & Fitness, Ltd. Customer Service Department Unit 4 Revie Road Indust

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1. It is the responsibility of the owner to ensure

that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described. 3. Place the treadmill on a level surface, with at least 2.5 m (8 ft.) of clearance behind it and 0.5 m (2 ft.) on each side. Do not place the treadmill on a surface that blocks any air openings. To protect the floor or carpet from damage, place a mat und

The decals shown here have been placed on your treadmill.

If a decal is missing, or if it is not legible, call the telephone number on the front cover of this manual and order a free replacement decal. Apply the decal in the location shown. 21. When using iFIT programs, you can manually override the speed and incline settings by pressing the speed and incline buttons. However, when the next “chirp” is heard, the speed and/or incline will change t

Thank you for selecting the revolutionary PROFORM®

500 CX treadmill. The 500 CX treadmill offers an im- pressive array of features designed to make your workouts at home more enjoyable and effective. And when you’re not exercising, the unique 500 CX tread- mill can be folded up, requiring less than half the floor space of other treadmills. For your benefit, read this manual carefully before you use the treadmill. If you have questions after reading th

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not

dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor- ma

ProForm PETL41106.0 4. Orient the Latch Housing (73) so the large hole is on the

indicated side. Attach the Latch Housing to the left Upright (84) with two Screws (3); start both Screws be- fore tightening either of them. Remove the knob from the pin. Make sure that the collar and the spring are on the pin. (Note: If there are two col- lars, place one on each side of the spring.) Next, insert the pin into the Latch Housing (73). Then, tighten the knob back onto the pin. Plu

7. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear

plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the tread- mill. Note: Extra hardware may be included. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see page 27). 5. Place the treadmill in the storage position (see HOW TO FOLD AND MOVE THE TREADM

HOW TO PUT ON THE CHEST PULSE SENSOR

The chest pulse sensor consists of two components: the chest strap and the sensor unit (see the drawing below). Insert the tab on one end of the chest strap into the hole in one end of the sensor unit, as shown in the inset drawing. Press the end of the sensor unit under the buckle on the chest strap. The tab should be flush with the front of the sensor unit. Next, wrap the chest pulse sensor around your chest and att

ProForm PETL41106.0 THE PRE-LUBRICATED WALKING BELT

Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply sili- cone spray or other substances to the walking belt or the walking platform. Such substances will deterio- rate the walking belt and cause excessive wear. HOW TO PLUG IN THE POWER CORD This product must be earthed. If it should malfunction or break down, earthing provides a path of least resistance for electric cur-

FEATURES OF THE CONSOLE

The treadmill console offers an impressive array of features designed to make your workouts more effec- tive. When the manual mode of the console is se- lected, you can change the speed and incline of the treadmill with the touch of a button. As you exercise, the console will display continuous exercise feedback. You can even measure your heart rate using the hand- grip pulse sensor or the chest pulse sensor. In addition, the con

HOW TO TURN ON THE POWER

Plug in the power cord (see page 10). Next, locate the on/off switch near the power cord. Make sure that the switch is in the “on” po- sition. Next, stand on the foot rails of the treadmill. Find the clip attached to the key (see the drawing on page 11), and slide the clip onto the waistband of your clothes. Then, insert the key into the console. After a moment, the matrix and the display will light. Test the clip by careful

The lower right corner

of the display will show the distance that you have walked or run, the elapsed time, your pace (in minutes per mile), and the speed of the walking belt. Note: When a program is selected (except for pulse pro- gram 2), the lower right corner of the display will show the time remaining in the program instead of the elapsed time. The center of the dis- play is the priority dis- play. Press the Display (DISP.) button repeat- edly unti

HOW TO USE A PRESET PROGRAM

Insert the key into the console. See HOW TO TURN ON THE POWER on page 12. Select one of the preset programs. To select a preset program, press one of the twelve preset program buttons; “P1,” “P2,” “P3,” “P4,” “P5,” “P6,” “P7,” “P8,” “P9,” “P10,” “P11,” or “P12” will appear in the priority display for a few seconds. A few seconds after a preset program is selected, the maximum in

Follow your progress with the matrix and the

display. See step 5 on pages 12 and 13. Measure your heart rate if desired. See step 6 on page 13. Turn on the fan if desired. See step 7 on page 13. When you are finished exercising, remove the key from the console. When the program ends, make sure that the in- cline of the treadmill is at the lowest setting. Next, remove the key from the console and put it in a safe place. Note: If the display remains lit a

ProForm PETL41106.0 HOW TO USE A PULSE PROGRAM

Follow the steps below to use a pulse program. Note: You must wear the chest pulse sensor to use a pulse program. While using the chest pulse sensor, do not use the handgrip pulse sensor. Put on the chest pulse sensor. See HOW TO PUT ON THE CHEST PULSE SENSOR on page 9. Insert the key into the console. See HOW TO TURN ON THE POWER on page 12. Select one of the pulse programs. To select a pulse program, press one of the four p

When the first segment ends, all target heart rate

settings will move one column to the left. The tar- get heart rate setting for the second segment will then be shown in the flashing Current Segment column. During any pulse program, the console will regu- larly compare your heart rate to the target heart rate setting. If your heart rate is too far below or above the target heart rate setting for the current segment, the speed of the walking belt will a

ProForm Treadmill Owners Instructions: