ProForm PFTL611040 Operation & User’s Manual
Text of ProForm PFTL611040 Operation & User’s Manual
ProForm PFTL611040 Model No. PFTL611040
Serial No.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Serial Number
Decal
Visit our website at
www.proform.com
new products, prizes,
fitness tips, and much more!
USER'S MANUAL
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction through
direct assistance from our
factory. If you have questions, or
if parts are
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
2. Use the treadmill only as described.
3. Place the treadmill on a level surface, with at
least eight feet of clearance behind it and two
feet on each side. Do not place the treadmill
on any surface that blocks air openings. To
protect the floor or carpet from damage, place
a mat under the treadmill.
4. Keep the tr
21. When using iFIT.com programs, an elec-
tronic “chirping” sound will alert you when
the speed of the treadmill is about to change.
Always listen for the “chirp” and be pre-
pared. In some instances, the speed may
change before the personal trainer describes
the change.
22. When using iFIT.com programs, you can man-
ually override the speed settings by pressing
the speed buttons. However, when the next
“chirp” is heard, the speed will change
Congratulations for purchasing the PROFORM® 5.0 FX
treadmill. The 5.0 FX treadmill offers a selection of fea-
tures designed to help you achieve your fitness goals
in the convenience of your home. And when you’re not
exercising, the treadmill can be folded away, taking less
than half the floor space of conventional treadmills.
For your benefit, read this manual carefully before
using the treadmill. If you have questions after read-
ing this manual, ca
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed.
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal
condition and does not affect treadmill performanc
2. Identify the Right Handrail (72), which has a large hole in
the left side. Feed the Upright Wire (42) into the hole in
the bottom of the Right Handrail and out of the large hole
in the side. Note: It may be helpful to use needlenose pli-
ers to pull the Wire Harness out of the hole.
Attach the upper end of the Right Handrail (72) to the
right Upright (69) with a 3” Bolt (37). Do not tighten the
Bolt yet. Attach the lower end of the Right Handrail wi
4. Hold the Console Base (47) near the Left Handrail (71).
Attach the end of the ground wire on the Console Base
to the indicated small hole in the Left Handrail with the
Silver Ground Screw (75).
47
75
Ground
Wire
42
6. Touch the Right Handrail (72) to discharge any static.
Press the end of the Upright Wire (42) into the socket in the
bottom of the Console Base (47). The connector should
slide easily into the socket and snap into place. If
9. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may
be included. Keep the included allen wrenches in a secure place. The large allen wrench is used to adjust the
walking belt (see page 26). To protect the floor or carpet, place a mat under the treadmill.
8. Attach the Storage Latch (29) and the Latch Spacer (44)
to the left Upright (69) with two 3/4” Screws (2) as shown.
Do not overtighten the Screw
OPERATION AND ADJUSTMENT
THE PRE-LUBRICATED WALKING BELT
Your treadmill features a walking belt coated with high-
performance lubricant. IMPORTANT: Never apply sil-
icone spray or other substances to the walking
belt or the walking platform. Such substances will
deteriorate the walking belt and cause excessive
wear.
HOW TO PLUG IN THE POWER CORD
Your treadmill, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden vo
FEATURES OF THE CONSOLE
The console offers a selection of features designed to
help you get the most from your exercise. When the
manual mode of the console is selected, the speed
and incline of the treadmill can be changed with the
touch of a button. As you exercise, the console will dis-
play continuous exercise feedback. You can even
measure your heart rate using the built-in pulse sensor.
Four speed programs are also offered. Each program
automatica
ProForm PFTL611040 HOW TO TURN ON THE POWER
Plug in the power cord
(see page 10). Next, locate
the reset/off circuit breaker
located on the frame near
the power cord, and switch
the circuit breaker to the
reset position.
Find the clip attached to the key (see the drawing on
page 11), and slide the clip onto the waistband of your
clothes. Next, insert the key into the console. After a
moment, the displays and various indicators will light.
Test the clip by carefully taking
ProForm PFTL611040 The Time display—
When the manual mode
or the iFIT.com mode is
selected, this display
will show the elapsed
time. When a program
is selected, the display will show the time remain-
ing in the program.
The Distance/Pace
display—This display
shows the distance that
you have walked or run
and your pace, in min-
utes per mile.
The Speed display—
This display shows the
speed of the walking
belt.
Note: The console can
display speed and dis-
tance in eit
HOW TO USE A SPEED PROGRAM
Insert the key into the console.
See HOW TO TURN ON THE POWER on page
12.
Select a speed program.
To select one of the
two walking programs,
the jogging program, or
the running program,
press the Program
Select button repeat-
edly. The Walking, Jogging, or Running indicator
will light.
When a walking, jog-
ging, or running pro-
gram is selected, the
maximum speed set-
ting of the program will
flash in the Speed dis-
play for a
Follow your progress with the displays.
See step 5 on page 12.
Measure your heart rate if desired.
See step 6 on page 13.
Turn on the fan if desired.
See step 7 on page 13.
When the program is completed, remove the
key.
When the program ends, make sure that the in-
cline of the treadmill is at the lowest setting.
Next, remove the key from the console and put it in
a safe place. Note: If the display remains lit
after the key is removed, the console is in
Enter a maximum speed setting.
After you have entered
your age, the letters
“SPd” and the maximum
speed setting of the pro-
gram will begin to flash
in the Speed display. If
desired, press the Faster or Slower button to
change the maximum speed setting.
Hold the pulse sensor.
To use a pulse program, you must hold the pulse
sensor. It is not necessary to hold the pulse sensor
continuously during the program; however, you
should hold the pulse sensor