ProForm 831.29604.0 Operation & User’s Manual

Text of ProForm 831.29604.0 Operation & User’s Manual

Model No. 831.29604.0

Serial No. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. Sears, Roebuck and Co., Hoffman Estates, IL 60179 TREADMILL EXERCISER User’s Manual • Assembly • Operation • Maintenance • Part List and Drawing Serial Number Decal

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ProForm 831.29604.0 1. It is the responsibility of the owner to ensure

that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described. 3. Place the treadmill on a level surface, with at least eight feet of clearance behind it and two feet on each side. Do not place the treadmill on any surface that blocks air openings. To protect the floor or carpet from damage, place a mat under the treadmill. 4. Keep the tr

20. When folding or moving the treadmill, make

sure that the storage latch is fully closed. 21. Inspect and properly tighten all parts of the treadmill regularly. 22. Never insert any object into any opening. 23.DANGER: Always unplug the power cord immediately after use, before cleaning the treadmill, and before performing the main- tenance and adjustment procedures de- scribed in this manual. Never remove the motor hood unless instructed to do so by an

Thank you for selecting the PROFORM® 500i treadmill.

The 500i treadmill combines advanced technology with innovative design to help you achieve your fitness goals in the convenience and privacy of your home. And when you’re not exercising, the 500i treadmill can be folded up, requiring less than half the floor space of other treadmills. For your benefit, read this manual carefully before using the treadmill. If you have questions after reading this ma

ProForm 831.29604.0 Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not

dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor- ma

2. Attach a Wheel (66) to the base of the Uprights (69) with

a Wheel Bolt (64) and a Nut (13) as shown. Do not overtighten the Wheel Bolt; the Wheel should turn freely. With the help of a second person, carefully tip the tread- mill onto its other side. See assembly step 1, and attach the other Extension Leg (63) and the remaining two Base Pads (57). Then, attach the other Wheel (66) as described above. With the help of a second person, carefully tip the

6. Touch the Right Handrail (72) to discharge any static.

Slide the sleeve off the connector on the Upright Wire (42) as shown in the inset drawing. Next, press the end of the Upright Wire into the socket in the bottom of the Console Base (47). The connector should slide easily into the socket and snap into place. If the connector does not slide easily and snap into place, turn the connec- tor and then insert it. Then, slide the sleeve back over the c

10.Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may

be included. Keep the included allen wrenches in a secure place; the large allen wrench is used to adjust the walking belt (see page 26). To protect the floor or carpet, place a mat under the treadmill. 9. Attach the Latch Housing (29) to the left Upright (69) with two 3/4” Screws (2). Make sure that the large hole in the Latch Housing is on the si

OPERATION AND ADJUSTMENT

THE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- icone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear. HOW TO PLUG IN THE POWER CORD Your treadmill, like any other type of sophisticated electronic equipment, can be seriously damaged by sudden

FEATURES OF THE CONSOLE

The treadmill console offers an impressive array of features designed to make each workout more effective and enjoyable. When the manual mode of the console is selected, the speed and incline of the treadmill can be changed with the touch of a button. As you exercise, the console will display continuous exercise feedback. You can even measure your heart rate using the built-in handgrip pulse sensor. In addition, the console featu

HOW TO TURN ON THE POWER

Plug in the power cord (see page 10). Next, lo- cate the reset/off circuit breaker on the treadmill frame near the power cord. Make sure that the circuit breaker is in the “reset” position. Next, stand on the foot rails of the treadmill. Locate the clip attached to the key (see the drawing on page 11), and slide the clip securely onto the waistband of your clothes. Then, insert the key into the console. After a moment, the d

The upper left corner

of the display will show the approximate number of calories you have burned dur- ing your workout. Note: When the calorie goal program is selected, the display will show the number of calories still to be burned. The lower left corner of the display will show the elapsed time and the distance that you have walked or run during your work- out. The lower left corner of the display will also show the incline level of the treadmill for

HOW TO USE A SPEED & INCLINE PROGRAM

Insert the key into the console. See HOW TO TURN ON THE POWER on page 12. Select a speed & incline program. To select a speed & in- cline program, press the Program Select button repeatedly until “P–1” or “P–2” appears in the display. When a speed & incline program is selected, the maxi- mum incline setting of the program and the maxi- mum speed setting of the program will flash in the display for a few s

ProForm 831.29604.0 HOW TO USE A DISTANCE PROGRAM

Insert the key into the console. See HOW TO TURN ON THE POWER on page 12. Select a distance program. To select a distance program, press the Program Select button repeatedly until “P–3” or “P–4” appears in the display. When a dis- tance program is selected, the maximum speed setting of the program will flash in the display for a few seconds. A distance goal of 5,000 meters or 10,000 meters will then appear in th

HOW TO USE THE CALORIE GOAL PROGRAM

Insert the key into the console. See HOW TO TURN ON THE POWER on page 12. Enter your weight if desired. See step 2 on page 12. Select the calorie goal program. To select the calorie goal program, press the Program Select button repeatedly until a goal of 50 calories and the words “SET CALS. GOAL” appear in the upper left corner of the display. When the calorie goal program is se- lected, a speed setting of 2.5 mph

HOW TO CONNECT THE TREADMILL TO USE

IFIT.COM PROGRAMS To use iFIT.com MP3 or CD programs, the treadmill must be connected to your MP3 player, CD player, portable stereo, home stereo, or computer. See pages 17 and 18 for connecting instructions. To use iFIT.com programs directly from our Web site, the treadmill must be connected to your computer. See page 18 for connecting instructions. To use iFIT.com video pro- grams, the treadmill must be connected to

ProForm Treadmill Owners Instructions: