ProForm PFTL99707.0 Operation & User’s Manual

Text of ProForm PFTL99707.0 Operation & User’s Manual

Model No. PFTL99707.0

Serial No. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. QUESTIONS? As a manufacturer, we are com- mitted to providing complete cus- tomer satisfaction. If you have questions, or if parts are missing, PLEASE DO NOT CONTACT THE STORE; please contact Customer Care. IMPORTANT: You must note the product model number and serial number (

TABLE OF CONTENTS

WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Before beginning any exercise program, con-

sult your physician. This is especially impor- tant for persons over the age of 35 or persons with pre-existing health problems. 2. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 3. Use the treadmill only as described. 4. Place the treadmill on a level surface, with at least 8 ft. (2.4 m) of clearance behind it and 2 f

ProForm PFTL99707.0 20. Never leave the treadmill unattended while it

is running. Always remove the key, unplug the power cord, and switch the reset/off cir- cuit breaker to the off position when the treadmill is not in use. (See the drawing on page 5 for the location of the circuit breaker.) 21. Do not attempt to raise, lower, or move the treadmill until it is properly assembled. (See ASSEMBLY on page 6, and HOW TO FOLD AND MOVE THE TREADMILL on page 20.) You must be able

Thank you for selecting the revolutionary PROFORM®

860 COMPETITOR treadmill. The 860 COMPETITOR treadmill offers an impressive array of features de- signed to make your workouts at home more enjoyable and effective. And when you’re not exercising, the unique 860 COMPETITOR treadmill can be folded up, requiring less than half the floor space of other tread- mills. For your benefit, read this manual carefully before using the treadmill. If you have ques

To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. Assembly requires

two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-perfor- mance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt

Identify the Right Upright (78) and the Right

Upright Spacer (79), which are marked with stickers. Insert the Upright Wire (38) through the Right Upright Spacer as shown. See the inset drawing. Tie the wire tie in the Right Upright (78) securely around the end of the Upright Wire (38). With the help of a second person, hold the Right Upright near the Base (83). Then, pull the other end of the wire tie until the Upright Wire is routed completely throug

With the help of a second person, hold a Bolt

Spacer (80) inside the lower end of the Left Upright (74). Insert a 3/8" x 4 1/2" Bolt (6) with a 3/8" Star Washer (9) into the Left Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (80), 3/8" x 4 1/2" Bolt (6), and 3/8" Star Washer (9). Orient the Left Upright (74) and the Left Upright Spacer (76) as shown. Hold the Left Upright Spacer and the Left Upright against the Base (83). Par

Insert the indicated connectors into the Right

Upright (78). Next, insert the fronts of the brackets on the Bridge (95) into the Uprights (74, 78), and then fully insert the brackets. Make sure that the plas- tic edges of the Bridge are inside the Uprights. Attach the Bridge (95) with six 1/4" x 1/2" Bolts (7) and six 1/4" Star Washers (10); start all six Bolts and then tighten them. See steps 4 and 6. Tighten the four 3/8" x 4 1/2" Bolts (6). 10 7 95

12. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear

plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the tread- mill. Note: Extra hardware may be included. Keep the included hex keys in a secure place; the large hex key is used to adjust the walking belt (see pages 23 and 24). 11. Raise the Frame (56) to the position shown. Have a second pers

If you purchase the optional chest pulse sensor (see page 19), follow the steps below to install the re-

ceiver included with the chest pulse sensor. 1. Make sure that the power cord is unplugged. Remove the indicated 1/2" Screws (1) and the Access Door (87) from the Console Back (91). 2. Connect the wire on the receiver (A) to the indi- cated wire extending from the Console Back (91). Hold the receiver so the small cylinder is oriented as shown and is

ProForm PFTL99707.0 OPERATION AND ADJUSTMENT

THE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- icone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear. HOW TO PLUG IN THE POWER CORD Your treadmill, like any other type of sophisticated electronic equipment, can be seriously damaged by sudden vo

ProForm PFTL99707.0 FEATURES OF THE CONSOLE

This revolutionary treadmill console offers a selection of features designed to make your workouts more ef- fective and enjoyable. When you use the manual mode of the console, you can change the speed and incline of the treadmill with the touch of a button. As you exer- cise, the console will display continuous exercise feed- back. You can even measure your heart rate using the handgrip pulse sensor or the optional chest pulse se

HOW TO TURN ON THE POWER

IMPORTANT: If the treadmill has been exposed to cold temperatures, allow it to warm to room tem- perature before turning on the power. If you do not do this, the console displays or other electrical components may become damaged. Plug in the power cord (see page 12). Next, lo- cate the reset/off circuit breaker on the treadmill frame near the power cord. Switch the circuit breaker to the reset posi- tion. IMPORTANT: The console

Follow your progress with the display.

The console offers several display options. The dis- play option you select will determine which workout information is shown. Press the Display button re- peatedly to select the desired display option. As you walk or run on the treadmill, the display can show the following workout information: • The elapsed time. • The distance you have walked or run. • The approximate number of calories you have burned.

HOW TO USE A PERSONAL TRAINER WORKOUT

1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 14. 2. Select a personal trainer workout. To select one of the 24 personal trainer workouts, press the Select Workout button. Then press the Increase and Decrease buttons below the Select Workout button until the name of the desired work- out appears in the display. When you select a personal trainer workout, the display will show the name, the

ProForm Treadmill Owners Instructions: