ProForm PFSY59001 Operation & User’s Manual

Text of ProForm PFSY59001 Operation & User’s Manual

As a manufacturer, we are

committed to providing complete customer satisfaction. If you have questions, or if there are missing parts, we will guarantee complete satisfaction through assistance from our factory. TO AVOID DELAYS, PLEASE CALL DIRECT TO OUR TOLL-FREE CUSTOMER HOT LINE. The techni- cians on our customer hot line will provide immediate assistance, free of charge. CUSTOMER HOT LINE: 1-800-999-3756 Mon.–Fri., 6 a.m.–6

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Read all instructions in this manual and in

the accompanying literature before using the weight system. 2. It is the responsibility of the owner to ensure that all users of the weight system are ade- quately informed of all precautions. 3. The weight system is intended for home use only. Do not use the weight system in any commercial, rental, or institutional setting. 4. Use the weight system only on a level sur- face. Cover the

BEFORE YOU BEGIN

ASSEMBLED DIMENSIONS: Height: 76.0 in. Width: 86.5 in. Length: 91.5 in. Foot Plate Low Pulley Station High Pulley Station Lat Bar Leg Lever Butterfly Arms Press Arms Leg Press Seat Seat Weight Stack Backrests Curl Pad Ab Pulley Station WARNING DECAL WARNING DECAL Thank you for selecting the versatile PROFORM® 960 weight system. The PROFORM® 960 offers a selection of weight stations designed to develop every major muscle group of the bo

Make sure you have the following tools:

• Two (2) adjustable wrenches • One (1) standard screwdriver • One (1) phillips screwdriver • One (1) rubber mallet • You will also need grease or petroleum jelly, a small amount of soapy water, and clear tape or masking tape. Note: Assembly will be more convenient if you have a socket set, a set of open-end or closed-end wrenches, or a set of ratchet wrenches. How to Identify Parts To help y

Locate and open the parts bags labeled “FRAME

ASSEMBLY.” See the inset drawing. Insert two 1 1/2” x 2 1/2” Inner Caps (83) and two 3/8” x 2” Carriage Bolts (92) into the Butterfly Base (4). Insert two 1 1/2” x 2 1/2” Inner Caps (83) into the indicated ends of the Butterfly Base (4) and the Press Base (6). Insert six 3/8” x 2” Carriage Bolts (92) into the Butterfly Base and the Press Base. Attach the Butterfly Base (4) to the Press Ba

ProForm PFSY59001 Attach the Butterfly Seat Frame (14) to the Butterfly

Upright (1) with two 3/8” x 3 3/4” Bolts (102), two 3/8” Washers (48), and two 3/8” Nylon Locknuts (50). Attach the Butterfly Seat Frame (14) to the Butterfly Front Leg (3) with two 3/8” x 3 3/4” Bolts (102), two 3/8” Washers (48) and two 3/8” Nylon Locknuts (50). Do not tighten the Nylon Locknuts (50) yet. 5. Press a 3” Round Inner Cap (78) into the Press Front Leg (20). Attach the

See the inset drawing. Insert two Weight Inserts

(56) into each Weight (21). Set the two Weight Bumpers (51) over the holes in the corner bar of the Press Base (6). Slide the Weight Guides (15) through the Weight Bumpers (51) and into the holes in the Press Base (6). Secure the Weight Guides to the Press Base with two 3/8” x 2 3/4” Bolts (89), four 3/8” Washers (48), and two 3/8” Nylon Locknuts (50). Slide

11. Secure the Press Top Frame (9) to the Butterfly Top

Frame (33) with two 3/8” x 3 1/4” Bolts (62), two 3/8” Washers (48), and two 3/8” Nylon Locknuts (50). Do not tighten the Nylon Locknuts yet. 12. Secure the Weight Guides (15) to the Press Top Frame (9) with two 3/8” x 1 3/4” Bolts (57) and two 3/8” Nylon Locknuts (50). Tighten the Nylon Locknuts (50) used in steps 2–12. 11 12 57 9 50 50 15 13 85 Lubricate 31 35 33 3

14. Insert a 2” Round Inner Cap (101) into the end of a

Butterfly Arm (10). Attach a Butterfly Handle (53) to the Butterfly Arm (10) with two 3/8” x 1” Bolts (84) and two 3/8” Washers (48). Repeat this step with the other Butterfly Arm (10). 15. Lubricate a 3/8” x 3 1/4” Bolt (62). Attach the left Butterfly Arm (10) to the Left Pivot Arm (71) with the Bolt and a 3/8” Nylon Locknut (50). Repeat this ste

Locate and open the parts bags labeled “CABLE

ASSEMBLY” and “PULLEYS.” Locate the Butterfly Cable (73), which is the shorter cable of the two that have eyelets on both ends. Attach the Butterfly Cable to the Right Pivot Arm (85) with a 5/16” x 2 1/4” Shoulder Bolt (79) and a 5/16” Nylon Jamnut (105). 11 18. Attach a Bumper (40) to the Press Front Leg (20) with a 1” Tap Screw (80). Press a 3” Round Inner Cap (78) into the top of the Pr

22. Remove the preassembled 3/8” x 2” Bolts (54) from

one set of Adjustable Pulley Plates (23). Wrap the Butterfly Cable (73) around a 3 1/2” Pulley (24). Attach the Pulley and a Cable Trap (25) between the top holes of the Adjustable Pulley Plates (23) with a 3/8” x 2” Bolt (54) and a 3/8” Nylon Locknut (50). Be sure that the Cable Trap is turned to hold the Cable in place. 23. Wrap the Butterfly Cable (73) around a “V”-Pulley (27). Att

26. Wrap the Ab Cable (47) around a 3 1/2” Pulley (24).

Insert the Ab Cable down through the Press Top Frame (9). Slide a 3/8” Washer (48) and a 5/8” x 3/4” Bushing (66) onto a 3/8” x 3 1/4” Bolt (62). Slide the Bolt through the Press Top Frame (9) and the 3 1/2” Pulley (24). Secure another 5/8” x 3/4” Bushing and 3/8” Washer to the Bolt with a 3/8” Nylon Locknut (50). 27. Remove the preassembled 3/8” x 2” Bolts (54) from the o

30. Locate the Weight Cable (72). Note that one end

of the Weight Cable has a bolt on it, and the other end has a ball on it. Lay the Weight Cable (72) inside the bracket on the Butterfly Base (4) in the manner shown. Attach a 3 1/2” Pulley (24) to the bracket with a 3/8” x 2” Bolt (54) and a 3/8” Nylon Locknut (50). Be sure the Weight Cable is in the groove of the Pulley. 31. Wrap the Weight Cable (72) around a 3 1/2” Pulley (24). Slide a 3/8

34. Wrap the Weight Cable (72) around a 3 1/2” Pulley

(24). Attach the Pulley and a Cable Trap (25) to the Butterfly Upright (1) with a 3/8” x 4 3/4” Bolt (60), a 3/8” Washer (48), and a 3/8” Nylon Jamnut (63). Be sure that the Cable Trap is turned to hold the Cable in place. 35. Wrap the Weight Cable (72) around a 3 1/2” Pulley (24). Attach the Pulley and a Cable Trap (25) between the lowest holes of the Adjustable Pulley Plates (2

ProForm PFSY59001 38. Wrap the Weight Cable (72) around a 3 1/2” Pulley

(24). Attach the Pulley and a Cable Trap (25) between the lowest holes in the Adjustable Pulley Plates (23) hanging from the Ab Cable (47) with a 3/8” x 2” Bolt (54) and a 3/8” Nylon Locknut (50). Be sure that the Cable Trap is turned to hold the Cable in place. 39. Remove the preassembled 3/8” x 1 3/4” Bolts (57) from the Small Pulley Plates (22). Wrap the Weight Cable (72) around a 3 1/

ProForm PFSY59001 42. Locate the Leg Press Cable (75). Attach the Leg

Press Cable to the indicated side of the Press Upright (2) with a 3/8” x 3 3/4” Bolt (102) and a 3/8” Nylon Locknut (50). Do not tighten the Nylon Locknut yet. Wrap the Leg Press Cable (75) around a 3 1/2” Pulley (24) in the direction shown. Attach the Pulley and a Cable Trap (25) to the indicated side of the Press Frame (8) with a 3/8” x 4 3/4” Bolt (60) and a 3/8” Nylon Locknut (50). Do

ProForm Treadmill Owners Instructions: