TP-Link TL-POE10R Operation & User’s Manual

Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translat ...

limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed ...

party responsible for compliance could void the user’s authority to operate the equipment. CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Продукт сертифі ...

Chapter 1 Introduction ........................................................ 1 1.1 Overview of the Product.............................................. 1 1.2 Features ...................................................................... 2 Chapter 2 Identifyin ...

¾ TL-POE10R PoE Splitter ¾ One Ethernet (CAT5 UTP) Cable ¾ One Power Cable ¾ This User Guide ) Note: Make sure that the package contains the above items. If any of the listed items are damaged or missing, please contact your distributor. Chapter 1 Introduction 1.1 Overview of the Pro ...

IEEE 802.3af standards ¾ Data and Power carried over the same cable ¾ Supports optional 5V DC, 9V DC or 12V DC power supply ¾ Supports Plug-and-Play for the devices ，without any configuration ¾ Elegant appearance with space-saving mini size Chapter 2 Identifying External Components ...

You can use TL-POE10R PoE Splitter with PSE or PoE Injector to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc. The following steps will tell you how to connect the PoE Splitter correctly. 1. Use a CAT5 UTP cable to connect a PoE ...

UTP cable for data transmitting. 4. Connect the DC OUT port to the power port of the same Ethernet device with the provided power cable. )Note: The power of Ethernet device is suggested to be under 10W. Now, the Ethernet device can work normally with data and power. The topology of this network i ...

IEEE 802.3af, Voltage Output DC 5V, 9V or 12V Power Output 12V/1A, 9V/1A, 5V/2A Ports 1 10/100/1000Mbps Auto-Negotiation RJ45 LAN port 1 10/100/1000Mbps Auto-Negotiation RJ45 PoE port 1 12V/9V/5V DC Power Output Port Cabling Type RJ45 CAT 5 UTP cable LED PWR Safety & Emissions ...