Supco EM60 Operation & User’s Manual

Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.TestEquipmentDepot.com ...

thermometer (thermocouple). Please take a few minutes to browse through this user manual before you begin to operate the meter to ensure that you are fully familiarized with how best to operate the meter as accurately and safely as possible. This meter can match any standard K-type or J-type the ...

■ Features 1. Display: 4 digit LCD Display 2. Resolution: 0.1℉/0.1℃（below 1832 ℉） 1℉/1℃（above 1832 ℉） 3. Range: K-type: -328℉ to ~2372℉ (-200℃ to 1300℃) J-type: -328℉ to 2192℉ (-200℃ to 1200℃) 4. Accuracy: ±(0.2% reading +2℉) for -328 to -148℉ ±(0.1% reading +1 ...

-4℉to140℉ (-20℃ to 60℃); 0 to 80%RH 10. Dimensions: 4.76”(L) x 2.36”(W) x 1.18”(H) 121mm(L) x 60mm(W) x 30mm(H) 11. Weight: 6.35 oz (app.) 180 g (app.) 11. Accessories: K-type thermocouple wire (2) Lanyard (1) AAA Batteries (3). Users manual ...

2. Thermocouple input jacks 3. LCD display 4. Function key l LCD Display SHIFT MEM MODE HOLD T1-T2 UNIT ON/OFF LIMIT TYPE Hi/Lo Light Double ways thermocouple meter ...

2. Indicates the high or low temperature setting 3. Indicates the second function key 4. Indicates type of thermocouple 5. Measurement Display area 6. Measurement Display area 7. T1-T2/ Maximum / Minimum Indicator 8. Indicates backlight ON 9. Temperature units 10. Low Battery Indicator ■. Operating Instructio ...

the display will show T1 and/ or T2, identifying which thermocouple(s) is (are) installed. 3. Press the function key to change temperature units, select T1-T2/MAX/MIN/HOLD mode and K or J type thermocouple, set Hi/Lo alarm, and store data. (refer to “function keys”) 4. Press the key for more t ...

SHIFT second function key: Press the key to enable the second function of any key, and a SHIFT icon will display on the LCD. The function of key: SHIFT disable：MEM、MODE、UNIT SHIFT enable：LIMIT、Hi/Lo、TYPE 2. T1-T2 key Press the key to enable the T1-T2 function. The T1-T2 icon will display on the LCD. 3. key MEM functi ...

When data is full (5 sets), the OU icon will be displayed. To clear memory, press the MEM key for more than 2 seconds. the CLER icon will be displayed. Press LIMIT To enable the Hi/Lo alarm function. Press SHIFT then press the LIMIT key to turn the Hi/Lo alarm ON or OFF. 4. key When pressed, a icon will be ...

or ℃ To select thermocouple type: When SHIFT is enabled, press the TYPE key to select K-type and J-type thermocouple. 6. key Press the MODE key to alternate between maximum/minimum measurement readout. Hi/Lo key: The alarm Hi/Lo temperature setting When the temperature is exceeds ...