SWEEX GA102 Installation

Text of SWEEX GA102 Installation

GA102 Sweex Gamepad Wireless Dual Shock USB+PS2

• Never expose the Gamepad to extreme temperatures. Do not place the device in direct sun light or close to heating elements. • Do not use the Gamepad in extremely dusty or moist environments. • Prevent hard shocks or impacts of the device, as this can cause damage to the internal electronics. • Never try to open the device yourself, this voids the warranty. Installation Installatio

SWEEX GA102 Press “Properties” to test and configure the Gamepad.

Vibration function (Rumble) On the Gamepad there is a “Rumble” button to switch the vibration function on and off. This function only works when the drivers are installed correctly.

With the turbo function it is possible to fire repeatedly by holding down the button. To set a button to turbo press the turbo whilst

pressing the button. To remove the turbo function press “Clear” whilst pressing the button. The Analog button switches the analog mode on and off. When the light is lit the analog mode is on. Automatic stand-by When the gamepad is not used for several minutes, it will go in

SWEEX Other Owners Instructions: