Swisher 2646 UNIVERSAL MOUNTING KIT Manual 

PH 660. 747. 8183 FAX 660. 747. 8650 swisherinc.com MANUFACTURING QUALITY LAWN CARE EQUIPMENT SINCE 1945 Owner’s Manual Accessories Mount 2646 Extension Kit 2900 Mount Kit Traxter 7119 Mount Kit Outlander 7668 IMPORTANT Read and follow all Safety Precautions and I ...

defects in materials and workmanship for a period of one (1) year from the date of purchase by the original consumer purchaser. We will repair or replace, at our discretion, parts found to be defective due to materials or workmanship. This warra ...

Read this manual completely. Failure to observe the following safety instructions could result in serious injury or death. This Safety Alert Symbol indicates important messages in this manual. When you see this symbol, carefully read the message that follows and be alert to the possibility lity of personal injury.
Read the man ...

15 1 NB-655 3/4 - 10 X 7 1/2 GR 5 Bolt 2 1 2593TK Slide Bar 16 1 NB243 3/4 - 10 X 5 GR 5 Bolt 3 2 2596TK Leaf Spring 17 1 NB-609 3/4 - 10 Nyloc Nut 4 2 2631TK Spring Shackle 18 2 2633TK Mount Bracket Short 5 2 2596-1 Nylon Bushing 19 2 2635TK Bracket Plat ...

TO ENSURE PROPER INSTALLATION, CAREFULLY FOLLOW ALL INSTRUCTIONS LISTED BELOW NOTE: The CV guards on your ATV maybe need to be trimmed or otherwise modified to allow for installation and proper clearance for the Accessory Mount. • If needed, for clearance, raise the front of the ATV. Make sure the support used is very stable ...

2. Using supplied hardware, assemble plates and brackets. Position the brackets so they allow wheels to turn without contacting the rims (Reference step 10 on page 5) . Front bolt NB619 should be close to the front of the A-arm, contacting it if possible. Honda Mounting Instruct ...

RAISE ATV SO THERE IS ENOUGH ROOM TO WORK. MAKE SURE THE SUPPORT USED TO HOLD UP THE ATV IS VERY STABLE. LAY OUT THE PARTS AND HARDWARE UNDER THE ATV. MOUNT THE BRACKET AND WELDMENT AS SHOWN IN THE FIGURE. REPEAT THE SAME PROCESS FOR THE RIGHT SIDE. REMOVE THE EXISTING 5/16 CENTER BOLT FROM THE ...

WHEN ORDERING PARTS, PLEASE HAVE THE FOLLOWING INORMATION AVAILABLE: * PRODUCT – ________________ * SERIAL NUMBER - _______________ * MODEL NUMBER - _______________ TYPE - _______________ * PART NUMBER WITH PAINT CODE * PART DESCRIPTION TELEPHONE - 1-800-222-8183 FAX - 1-660-747 ...