SWR WORKINGMAN’S 10 Owner's Manual

File Specifications

Brand: SWR
Category: Amplifier
Model: WORKINGMAN’S 10 (Owner's Manual), pr834UjesRFK6
File Type: PDF
File Size: —
Pages: 24 pages

Download PDF

Download SWR WORKINGMAN’S 10 Manual (24 pages)

Read Online:

Read the SWR WORKINGMAN’S 10 Owner's Manual online using the built-in PDF viewer.

Key Pages of Document

SWR • CORONA, CA • USA

INCLUDES: WORKINGMAN’S 10 WORKINGMAN’S 12 WORKINGMAN’S 15 ...

TABLE OF CONTENTS

WORKINGMAN’S COMBOS OWNER’S MANUAL • 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 WORKINGMAN’S 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 TOP PANEL FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 REAR ...

80 watt, 1x10 combo amplifier with tweeter. A small yet

powerful bass cube, extremely portable. The SWR Sound “to go.” Speaker Complement: (1) Custom Designed 10" SWR driver (1) Custom Designed Piezo tweeter Power Output: 80 Watts RMS, 100 Watts RMS @ 4 Ohms (with 8 ohm extension speaker) Impedance: 8 Ohms (internal) Dimensions: 16.25" ...

USING THE TONE CONTROLS

To get the most out of the Tone Controls of your Workingman’s 10, it would be best to first understand how the Aural Enhancer works, and how it interacts with the Bass, Midrange and Treble controls. Think of it as a variable tone curve, changing with its position. As you raise the control from “0,” or the fully counterclockwise ...

Pressing the Power Switch to the ON position activates the Workingman’s 10 electronics as indicated by the LED above the

switch. REAR PANEL FEATURES TO TUNER The To Tuner send jack allows the user to connect their instrument tuner to the Workingman’s 10 without having to unplug and go back and forth from amp to tuner to amp. This feature is ...

STEREO HEADPHONES JACK

By inserting a set of stereo headphones into this jack you will be able to monitor your sound or practice without disturbing your neighbors. The headphone volume level is adjusted by the Volume control. We suggest you begin with the Volume off (fully counterclockwise), then slowly bring the volume up to your desired level. If you hear ...

120 watt, 1x12 combo amplifier with tweeter. A little powerhouse. Great for both electric

and upright basses. Speaker Complement: (1) Custom Designed 12" SWR driver (1) Custom Designed Piezo tweeter Power Output: 120 Watts RMS, 160 Watts RMS @ 4 Ohms (with 8 ohm extension speaker) Impedance: 8 Ohms (internal) Dimensions: 15.5" W x 22.25" H ...

The Active input jack should be used with instruments having a built-in (on-board) preamp that will produce signals over 1 volt

RMS. Some really “hot” pickups installed in your instrument may find the Active input more compatible. The best judge is your own ears. NOTE: Using the Active input with passive basses may result in a loss of high-e ...

The Bass control, as stated above, works in a range that will be useful under most “normal” conditions. Its musical use might

be thought of as a “fatness” control. Leaving the Aural Enhancer in a position lower than 12 o’clock will not boost the extreme bottom so much as to make indistinct the effect of the Bass control. The overall � ...

⚠️ Download Safety

The Amplifier Owner's manual (24 pages) is completely safe to download (last scan date: 06/06/2026).

Related PDF Instructions for SWR WORKINGMAN’S 10: