B&B Electronics Access Converter/ 3 Operation Manual

Ottawa, IL 61350 USA Phone (815) 433-5100 — General Fax (815) 433-5105 Email: [email protected] Website: www.bb-elec.com European Headquarters B&B Electronics Westlink Commercial Park Oranmore, Co. Galway, Ireland Phone +353 91-792444 — Fax +353 91-79244S5 Email: [email protected] Webs ...

This equipment has been tested and found to comply with the limits for a Class B computing device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, us ...

Electrical Business Equipment. CE: The products described herein comply with the Council Directive on Electromagnetic Compatibility (89/336/EEC) and the Council Directive on Electrical Equipment Designed for use within Certain Voltage Limits (73/23/EEC). Certif ...

AC Adapter Input Load: 100/240 ±10% VAC, 0.25A, 50/60 Hz, 5 VDC output with maximum output current of 1A Unit Power Consumption (Typical): 600 mA @ 5 VDC Operating Temperature: 32° to 122° F (0° to 50° C) Storage Temperature: -4° to 158° F (-20° to 70° C) Humidity: 5 to 90% (non-condensing); 0 to 10,000 f ...

The LED indicator for the fiber uplink port is located on the RJ-45 connector of the downlink port next to the power connector. There are four LED functions for the fiber uplink port. The fiber uplink port LED functions are as follows: • Glows green when a link is established on the fiber port. • Glows green indicating a valid link, ...

Install the Access Converter/3 as a table-top device, or mount to a wall surface with the appropriate bracket (included). To wall mount, use the supplied screws to attach the wall-mount bracket to the Access Converter/3, then simply mount the unit to the wall by tightening the screws (not supplied). Note The Access Conver ...