3M G5 Operating Instructions Manual

3M Commercial Solutions Division 3M™ Drive-Thru Systems Model G5 and Model XT-1 Operating Instructions ...

3M™ Drive-Thru Systems Model G5 and Model XT-1 Operating Instructions November 6 2014 – Revision 2.1 Page 3 of 77 Table of Contents OVERVIEW ..................................................................................................................................... 7 Safety Information ..................................................................................................................... 7 Safety Rules ........ ...

November 6 2014 – Revision 2.1 Page 4 of 77 3M™ Drive-Thru Systems Model G5 and Model XT-1 Operating Instructions Haptics “Vibration” Alerts and Blue LED Alerts on Headsets ................................................ 25 Haptics “Vibration” Alerts on Headsets ............................................................................................ 25 Blue LED Alerts on Headsets ......................................... ...

3M™ Drive-Thru Systems Model G5 and Model XT-1 Operating Instructions November 6 2014 – Revision 2.1 Page 5 of 77 MAINTENANCE ............................................................................................................................ 48 G5 Headset ............................................................................................................................... 48 Replacing the Carrier ................... ...

November 6 2014 – Revision 2.1 Page 6 of 77 3M™ Drive-Thru Systems Model G5 and Model XT-1 Operating Instructions Alert Message External Trigger Inputs .................................................................................. 69 Message Names .................................................................................................................... 70 Dual Lane Systems – Lane 2 .................................... ...

Operating Instructions November 6 2014 – Revision 2.1 Page 7 of 77 Overview Safety Information Safety Rules Read, understand, and follow all safety information contained in these instructions prior to installation & operation of the 3M™ Wireless Communication System Model XT-1 and the 3M™ Drive Thru Headset G5. Failure to follow all instructions listed could result in electrical shock, fire a ...

Page 8 of 77 3M™ Drive-Thru Systems Model G5 and Model XT-1 Operating Instructions CAUTION To reduce the risks associated with environmental contamination due to battery pack & to lead in the solder: • Dispose of batteries, power supplies, battery charger and base station in accordance with federal, state & local requirements. If preferred, return these components to 3M Service Center for recycle. Other Conv ...

Operating Instructions November 6 2014 – Revision 2.1 Page 9 of 77 The XT-1 Base Station complies with FCC RF radiation exposure limits. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This includes any external antenna. For any external antenna that is used with the XT-1 Base Station, the minimum length of RF cable required i ...

Page 10 of 77 3M™ Drive-Thru Systems Model G5 and Model XT-1 Operating Instructions Note: Modifications to this device shall not be made without the written consent of 3M Company. Unauthorized modifications may void the authority granted under Federal Communication Rules and Industry Canada Rules permitting the operation of this device. Recycling / Disposal (Notice to European Union customers) These products mu ...

Operating Instructions November 6 2014 – Revision 2.1 Page 11 of 77 Configuration Enter Configuration Mode Configuration mode is a passcode-protected area that contains most of the configuration options for the base station system. Using the access provided for users it is possible to set up all of the functionality of the system. For basestations with software version 4.0 or 5.12 and highe ...

Page 12 of 77 3M™ Drive-Thru Systems Model G5 and Model XT-1 Operating Instructions Interpreting Display Information Depending upon what you are doing, or what you can do, text on the display screen is handled according to the following conventions: Static or Informational Static, informational, or non- editable text has no markings on it. Editable items that are not currently-selec ...

Operating Instructions November 6 2014 – Revision 2.1 Page 13 of 77 Mode (Exit) button In run mode, you must press and hold Mode while entering your passcode to enter user or installation service. In user and installation service modes, use the Mode button to exit from a current field that you are editing without saving any changes or to go upward (backward) in the configuration menus. Enter ...

Page 14 of 77 3M™ Drive-Thru Systems Model G5 and Model XT-1 Operating Instructions • Peer-to-Peer – a direct connection between the base station and the PC using a crossover cable • Private network – a connection between the base station and a router, switch or hub using an Ethernet cable. The PC is somewhere on the same network. • Enter the configuration mode, see page 11. • Select 16 Network ...

Operating Instructions November 6 2014 – Revision 2.1 Page 15 of 77 Change Basic Volume Settings Note: All volume settings should be adjusted during normal or peak business hours. Adjusting them during slow times will likely produce volume settings that are too low. Note: Inbound and outbound are always defined from the perspective of the headset. Inbound Microphone Volume Changing the inbou ...

Page 16 of 77 3M™ Drive-Thru Systems Model G5 and Model XT-1 Operating Instructions Change the Monitor Volume The monitor is an additional speaker that can be used to monitor drive thru communication without a headset, typically in the kitchen. If the monitor has a volume control built into it, you can use it to control the overall volume level of the speaker. To be more specific about which elements you ...

Operating Instructions November 6 2014 – Revision 2.1 Page 17 of 77 Vehicle Approach Some sites are equipped with a vehicle approach detector, which alerts you when a vehicle enters the parking lot or drive through approach lane. If your site is equipped with the detector, you can change the volume at which the tone is played on the monitor. Also, if you do not wish to hear the tone, you c ...

Page 18 of 77 3M™ Drive-Thru Systems Model G5 and Model XT-1 Operating Instructions To change the night volume setting: • Enter the configuration mode, see page 11. • Select a new value for 03 Night Volume > Reduce DriveThru Volume At Night By. The range is 0 to the current day volume level. Notes: Night Volume is never higher than Day Volume. Night volume reduction is a subtracted value, not the resul ...

Operating Instructions November 6 2014 – Revision 2.1 Page 19 of 77 • Enter the base station configuration mode, see page 11. • Select 04 Registration > 2 Remove Headsets. • Scroll to the number of the headset you want to un-register. • Press Enter. Note: If you do not know or have access to the number of the headset to be un- registered, identify the headsets that you want to remain ...

Page 20 of 77 3M™ Drive-Thru Systems Model G5 and Model XT-1 Operating Instructions Acoustic Echo Canceller Perform the following procedure if there is a delayed repetition (echo) of the outbound sound: • Enter the base station configuration mode, see page 11. • Make a new selection for 05 Noise Reduction > Acoustic Echo Canceller. Options are Min, Low, Med, and Max. You may need to experiment for a s ...