Da-Lite Roll-AroundMarker Boards Instructions

53114 Rev. 6/02 DA-LITE IS MORE THAN PROJECTION SCREENS Da-Lite Tripod, Wall & Ceiling and Electric Screens Da-Lite Overhead Projectors Da-Lite Lecterns Communications Cabinets Da-Lite Project-O-Stands and Easels Da-Lite Model 5000 Portable POWER PRESENTATION PRODUCTS The In Instructions For Roll-Around Marker Boards DA-LITE SCREEN COMPANY, INC. 3100 North Detroit Street Post Office Box 137 Warsaw, Indiana 46581-0137 Phone: 574/267-8101 800-622-3737 Fax: 574/267-7804 http:// www.da-lite.com e-mail: [email protected]

easel. 1. Place upright “A” on flat surface with thread- ed holes facing up. 2. Place chalk tray “B” on upright “A”; insert four (4) 1/4”-20 screws into holes and tighten with screwdriver. 3. Stand partially assembled frame on casters. 4. Stand upright “C” on casters with holes fac- ing chalk tray “B”. With four (4) 1/4”-20 screws, attach chalk tray “B” to upright “C” and tighten with screwdriver. 5. Insert one (1) #14 x 2" screw through top hole in outisde of upright “A” and “C” and to cen- ter hole on marker board “D” and tighten for stability. 6. Insert second #14x2" screw through bottom hole in upright “A” and “C” and into hole on marker board “D” and tighten. 7. Your roll-around marker board is now ready for use. CASTERS CASTERS #14 X 2" WOOD SCREW UPRIGHT “A” 1/4"-20 X 5/8" MACHINE SCREW UPRIGHT “C” MARKER BOARD “D” CHALK TRAY “B” HARDWARE PACKAGE CONTAINS: 8 1/4 - 20 x 5/8" Screws 4 #14 x 2" Screws