CalDigit T3 Operation & User’s Manual

Package Contents 06 T3 Diagram 07 2. Using the T3 ...

performance and ultimate flexibility. This three drive RAID array has the ability to be configured into RAID 0, 1, or JBOD. The T3 utilizes removable drive modules which allows users to add storage, transfer drives between other T s ...

Only use the T3 in an area with sufficient ventilation. Make sure that the fan is not obstructed to ensure proper air flow, which is essential for heat dissipation. Do not leave or use the T3 near a heat source or direct sunlight. Avoid using the T3 in ext ...

Burst transfer rates will vary from one computer to another. Depending on the host configuration, average speeds are usually lower. Weight varies by configuration and manufacturing process. The use of this product is subject to acceptance of the software license agreements included. This pro ...

2 3 x CalDigit universal drive modules 3 1 x drive module pin release 4 1 x drive module lock key 5 1 x power supply 6 1 x AC cord 1 2 3 4 5 6 ...

Dual Thunderbolt™ Ports Kensington Lock Removable Drive Module Power LED LED Status Lights Front Side Power Button Drive Module Lock PIN Release ...

Connecting the T3 1 Turn on the computer, make sure you have logged into the OS. 2 Connect a Thunderbolt cable* from your computer to the T3. 3 Connect the power supply to the T3. 4 Press the T3’s power button and it will boot. You will see it mount and it will be ready for use. PC users will need to format the T3 f ...

Mac OS X 1 Open “Disk Utility” (Macintosh HD > Applications > Utilities) and select the RAID tab. 2 Enter the name you would like for your RAID volume. 3 Select the format you would like to use, Mac OS Extended (Journaled) is recommended. NOTE The T3 comes formatted as a software RAID 0 using Mac’s HFS + file syste ...

Striped RAID Set - RAID 0 - distributes data evenly across all drives in RAID 0. Use this mode for increased performance. RAID 0 provides no protection against drive failure. It is highly recommended to have a backup when using the T3 in RAID 0. Mirrored RAID Set - RAID 1 - creates identical copi ...