Edge Cody 12" Installation Manual

Text of the manual

M3 SET SCREW

SWIVEL CONNECTOR 2 Installation Instructions for Cody 12" Canopy Mount Picture Light 904-CPL-12-01 Install the Fixture 1 CPL-12-_ 1718 W. Fullerton Ave Chicago, IL 60614 Tel: 773-770-1195 Fax: 773-935-5613 www.edgelighting.com [email protected] © 2009 Edge Lighting. All Rights Reserved. 1: Rotate the Cody's head perpe

3: Hold the two mounting brackets against the wall above the

electrical box. Using a level, align the mounting brackets and mark the four bracket holes on the wall. 4: Tap the anchors onto the marked points into the wall up to the threaded portion with a hammer. 5: Screw the threaded portion of

2MM ALLEN WRENCH

M4 SET SCREW 11 11: To adjust the height, loosen the four M4 set screw on the mounting brackets with the provided 2mm Allen wrench. Adjust the Cody to the desired height by sliding it up or down. Tighten the four M4 set screws with the 2mm Allen wrench. MOUNTING BRACKET G 11 H 12 THUMB NUT CUTOUT 14 13 12: Connect

Other Light Fixture Manuals