Daikin FXAQ20PV1 Installation Manual

Installation manual CONTENTS 1. SAFETY PRECAUTIONS...............................................................................................1 2. BEFORE INSTALLATION ................................................................................... ...

out by qualified personnel according to local laws and regulations and this installation manual. An insufficient power supply capacity or improper electrical construction may lead to electric shocks or fire. • Make sure that all wi ...

• When selecting installation site, refer to the installation pattern. • This unit, both indoor and outdoor, is suitable for installation in a commercial and light industrial environment. If installed as a household appliance it could cause electromagnetic interf ...

CHECK AFTER INSTALLATION IS FINISHED. a. Items to be checked after completion of work b. Items to be checked at time of delivery Also review the “SAFETY PRECAUTIONS” c. Points for explanation about operations 2-4 NOTE TO THE INSTALLER Be sure to instruct customers how to properl ...

(1) Select an installation site where the following conditions are fulfilled and that meets with your customer’s approval. • In the upper space (including the back of the ceiling) of the indoor unit where there is no possible dripping of water from the refrigerant pipe, drain pipe, water pipe, etc. • Where the w ...

• Use only accessories and parts which are of the designated specification when installing. CAUTION • Install so that the unit does not tilt to either side or forward. • Do not hold the unit by the horizontal flaps when lifting it. (This may damage the horizontal flaps.) (1) Open the piping through-hole. • The re ...

(5) Point the pipe in the direction it will be passed out. For right, bottom-right, and back-right piping (Refer to Fig. 6) • Wrap the drain hose and the refrigerant piping together with the insulat- ing tape (4) so that the drain hose is below the refrigerant piping. For left ...

• Placing buffering material between the wall and the indoor unit at this time will make work easier. For right, bottom-right, and back-right piping • Pass the drain hose and the refrigerant piping to the wall. (7) Pass power supply wiring, transmission wiring, ground wirin ...