ACTi Mobile Server Operation & User’s Manual
Text of ACTi Mobile Server Operation & User’s Manual
Table of Contents
1 Overview
4
Introduction .................................................................................... 4
Main Specification .......................................................................... 5
System Requirements .................................................................... 5
2 Installation
7
Disabling UAC Function in Windows .............................................. 7
General Confi
Network Architecture .............................................................. 4
Fig. 2
TweakUAC ................................................................................ 7
Fig. 3
Configurations of Mobile server .............................................. 8
Fig. 4
Media Server URL ..................................................................... 8
Fig. 5
NVR ports ..........................
ACTi Mobile Server provides streaming re-direction from NVR Server to all web clients that
can see MJPEG format video. Users do not need to modify encoding type of IP devices or
NVR settings for Mobile Server, because the service will automatically encode video in
MJPEG format. Web clients can directly access ACTi Mobile Server through all the
MJPEG-enabled browsers such as Safari, Google Chrome, Firefox e
Minimum PC specification:
PC Specifications
16 Channels
32/48/64 channels
Recommended
Recommended
CPU
Intel Core 2 Quad 2.66 GHz
Intel i5-670 3.46 GHz
Memory
4GB +
4GB +
Network
Gigabit Ethernet
Gigabit Ethernet
Graphics Card
nVidia 9800 GT or better
nVidia GTS 250 or better
Graphics Card memory
512 MB or more
512 MB or more
Hard Drive Space
2 GB for NVR, 250 GB for Vi
ACTi Mobile Server Supported Windows OS for 32 bit and 64 bit systems are listed below
For 64 bit NVR version, 64 bit Internet Explorer is not supported. Please use
32 bit Internet Explorer.
Please consult your Network Administrator for service bandwidth capacity for user
connections.
OS
Version
32 bit
64 bit
Windows 7
Professional
Y
Y
Windows 7
Enterprise
Y
Y
These are the general steps of completing the mobile server installation. For the NVR Server
PC, please:
1. Set up port forwarding rule to open ports for NVR HTTP (default:80) , NVR control
(default: 6001), NVR streaming (default:6001) and Mobile Server streaming (uses
only 90, please don‟t change it).
2. Make sure you have disabled UAC functions. (When using Windows Vista or 7)
3. Install Mobile Server.
Please b
After you installed NVR server in your PC and completed all NVR configurations, please
execute the file „Mobile Server.msi‟ in the same PC.
After it is installed, you have to configure IP address and ports to let web clients access to
Mobile Server. There is one file under NVR folder that you have to edit:
C:\Program Files\NVR\IPControlCenter\m\config.xml.
Please open this file with Notepad and you wil
(2) NVR Server
Fig. 5
NVR ports
< IP>: Mobile Server will use it to communicate with NVR server. Since we
install Mobile Server in the same PC with NVR Server, we can use 127.0.0.1
as the IP address.
The URL Path consists of the address and HTTP port of NVR.
-IP: This URL path will be used by Mobile Server to communicate with
NVR Server. Since we install Mobile Server in the same PC with NVR
server, you can l
PTZ Camera Configuration
For PTZ function, you will also have to configure it for each PTZ camera manually. Please
follow the instruction below and configure it through the following steps.
Step1: Please enable PTZ function in NVR for each PTZ camera. And please make sure PTZ
function work in NVR with proper settings.
Step2: Please go to Media Server folder
“C:\Program Files\ACTi\Mobile Server\Media Services\config\device\�
Find PTZ Camera
Configuration Section
Configuration
text end
Configuration
text start
●In this document, User editable scope is
between and
labels; there
are originally three sections in the content,
each section begins with
“- ”and ends with
“ ”. The last section
describes the attributes of PTZ
camera"{CAMERA_ID}", where
Configurations of PTZ Cameras (Example)
First, you will have to find the PTZ camera that you have according to Model
and
Production Id
. After that, you will be able to start to configure all the other fields. Items from
(1) to (11) need to be properly configured. If not, the PTZ function won‟t be able to work.
(1) Media Source id and (2) Identify Name: Please fill in the Camera ID. See the
[Camera ID] shown on NVR Ca
ACTi Mobile Server [User Name] shown on NVR Camera Basic Setting page of NVR Server( See Fig. 8).
(9) Model and (10) Production Id: It shows the model name of the PTZ camera. See the
model name shown on NVR Camera Basic Setting page of NVR Server( See Fig. 8).
(11) Contact Type: For Protocol setting, input “1” here if you use TCP; input “2” here if you
use RTP. See the [Protocol] shown on NVR Camera Basic Setting page of NVR
Server( See
Things you need to know before you start
1. Mobile Server service is a web service working with an NVR Server. Please make sure
the NVR Server is working properly, and port connection is free from firewall or other
barriers. Otherwise, thumbnails or video traffic may be blocked out and unable to be
displayed.
2. NVR Server configuration should still go through NVR Workstation / Web client and is
NOT included in Mobile Server.
ACTi Mobile Server Fig. 11 Login Screen
1
Username
Please key in account username. Default username is Admin.
2
Password
Please key in account password. Default password is 123456.
3
Remember Password
Check the box to remember username and password.
4
Login
Please Click on Login button to log into the service.
ACTi Mobile Server Live Main Screen
Upon login of the system, Live tab will automatically display thumbnails of all the channels
captured on that second from IP devices. Thumbnail layout may change in accordance with
display panel resolution.
Fig. 12 Live Main Screen
Summary of the Live Main Screen
1.
Module Tab
To switch modules, user may click on one of the tabs to change modules.
2.
Channel Thumbnails
Still images captured on the spot wh
There are two modules in the system, Live and Playback, to carry out live streaming and
playback.
Fig. 13 Module Tabs
Under Live module when a specific channel is selected, tabs may vary depending upon IP
device model. Some channels might have PTZ-enabled tab if they are PTZ models. Users may
double click on one of the thumbnails to start live stream, and tabs on the top-left-hand-side
shall be displayed as in Fig.
In Live main page, double click on a channel to start live view.
Fig. 16 Live View
1. Home
To go back to Live main page.
2. Playback
To switch to Playback page.
3. PTZ
To control PTZ. Details please refer to PTZ Function.
4. Quit
To log out from the service.
Fig. 17 Live streaming with PTZ control
1. Speed
You may define speed of movement here.
2. Preset
To select a preset point.
3. Go
Click on Go to move to the preset point with pre-defined speed.
4. On-screen PTZ
Users may move the PTZ device via on-screen PTZ control buttons.
To control PTZ, click on the display panel, then PTZ buttons shall overlay transparently. Click
on one of the buttons to control PTZ. These b