Adam S1X Operation Manual

Keep the instructions for further reference. Please heed the warnings and follow the instructions. Caution: To reduce the risk of electric shock, do not open the loudspeak- er. There are no user-serviceable parts inside. Refer servicing to qualified service personnel. This product ...

Protect the cord from being walked on or pinched. Always use fully checked cables. Defective cables can harm your speakers. They are a common source for any kind of noise, hum, crackling etc. Always keep electrical equipment out of the reach of children. Always unplug sensitive electronic equipment during lightning storms. The monitor ...

Safety Instructions..............................................2-3 1. Introduction........................................................5 2. Quick Start .........................................................6 2.1 Important Information ........................................6 2.2 Connecting the speakers ............................ ...

1. Introduction Dear customer, Thank you for choosing the ADAM Audio S1X monitor. ADAM loudspeakers are built for maximum quality reproduction and audio perfection. Our speakers of the SX series are precise, high-resolution speaker systems which meet highest expectations in sound quality and craftsmanship. The S1X is a two-way ported ...

After having unpacked your loudspeaker, please allow the system to acclimate to the temperature of the room for approximately an hour. We recommend using high quality cables to guarantee optimal performance. It is important to ensure the speakers sit firmly on a solid surface! We recommend that you retain the original ...

3.1 General recommendations Please make sure that there are no obstacles in the way from the monitor to your ears. You should be able to see the speakers completely. The distance to the surrounding walls should be at least 40 cm to avoid early reflections, which will degrade the sound. The loudspeakers should be aligned with the liste ...

If the loudspeaker is going to be used for stereo ap- plications, the optimum listening position should be at the top of an imaginary equilateral triangle with the two loudspeakers should be placed at the other two points of this triangle. The loudspeakers should be aligned with the listener’s position. 3.4 Surround Placement Sp ...

4.1 LED On the bottom of the tweeter you find an LED. It indicates Power on and, in case of an overload, the function of the protective circuit. Please note: When the speaker is switched on, the LED will flash red a few times. This does not indicate an overload! • The LED starts to glow green during normal operation (the power swit ...

‘Input Gain’ regulates the overall input sensitivity of your loudspeaker within a range of -10 to +10 dB, and controls the volume of your loudspeaker equally in all frequency ranges. 4.4 High Gain Whereas the ‘Input Gain’ raises or lowers the overall in- put sensitivity up to +/-10 dB, the ‘Tweeter Gain’ works within the frequ ...