ADJ Fusion FX bar 2 User Instructions

Los Angeles Ca. 90040 www.americandj.com Fusion FX Bar 2 Introduction ©American DJ Supply® - www.americandj.com - Fusion FX Bar 2 Instruction Manual Page 2 5/09 Unpacking: Thank you for purchasing the Fusion FX Bar 2 by Ameri­ can DJ®. Every Fusion FX Bar 2 has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the ship­ ping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your fixture for any damage and be sure all accessories necessary to operate the unit ha ...

©American DJ Supply® - www.americandj.com - Fusion FX Bar 2 Instruction Manual Page 4 ©American DJ Supply® - www.americandj.com - Fusion FX Bar 2 Instruction Manual Page 3 • RGB LED Wash, 1 Colored LED Moonflower, & 1 White LED Moonflower • RGB Color Mixing • 2 Show Modes • Electronic Dimming 0-100% • Built in Microphone • DMX-512 protocol • 16 DMX Channels • 3 Operating Modes - Sound Active, Show Mode, or DMX Control • UC3 Remote Control Compatiable (Not Included) • Power Cord Daisy Chaining • To reduce the risk of electrical shock or f ...

age in your area matches the required voltage for your American DJ® Fusion FX Bar 2. The American DJ® Fusion FX Bar 2 is available in a 120v and 220v version. Because line voltage may vary from venue to venue, you should be sure your unit voltages matches the wall outlet voltage before attempting to operate you fixture. DMX-512: DMX is short for Digital Multiplex. This is a universal pro­ tocol used as a form of communication between intelligent fixtures and controllers. A DMX controller sends DMX data instructions from the controller to the fixture. DMX data is sent as serial dat ...

Fusion FX Bar 2 System Menu ADDR - DMX Address Setting via control board - 1. Tap the MENU button until “AddR” is displayed, press ENTER. 2. “X” will now be displayed, “X” represents the displayed address. Press the UP or DOWN buttons to find your desired address. 3. Press ENTER to confirm, and then press and hold the MENU button for at least three seconds to assign. SLND - This will let you set unit as a master or slave in a master/slave configuration. 1. Tap the MENU button until “SLND” is displayed, press ENTER. Eit ...

a random show. Press the UP or DOWN buttons to find your desired show and press ENTER to confirm. SOUN - In this mode you can run in sound active mode. 1. Tap the MENU button until “SOUN” is displayed, press ENTER. 2. Either “ON” or “OFF” will now be displayed. Press the UP or DOWN buttons to select one or the other. BLND - This will control blackout 1. Tap the MENU button until “bLNd” is displayed, press ENTER. 2. Either “YES” or “NO” will now be displayed. Press the UP or DOWN buttons to select one or the other. 3. Press ENTER, and then press and hold the ...

©American DJ Supply® - www.americandj.com - Fusion FX Bar 2 Instruction Manual Page 11 Fusion FX Bar 2 UC3 Control Stand By Blackout the unit Function 1. Ø5 LED Strobe 2. Moon flower strobe Select show Show1-2 Mode Sound (LED OFF) LED ON Fusion FX Bar 2 DMX Channels & Functions Channel Value Function 1 RED 1 - 255 0% - 100% 2 ...

©American DJ Supply® - www.americandj.com - Fusion FX Bar 2 Instruction Manual Page 13 Fusion FX Bar 2 Cleaning Due to fog residue, smoke, and dust cleaning the internal and exter­ nal optical lenses must be carried out periodically to optimize light output. 1. Use a soft cloth to wipe down the outside casing. Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog residue, dust, dew). Listed below are a few common problems the user may encounter, with solutions. U ...

Fusion FX Bar 2 Specifications Model: Fusion FX Bar 2 SPECIFICATIONS: Voltage: 100V~240V 50/60Hz LEDs: 144 LEDs (48 Red, 48 Green, & 48 Blue) 2 x 3W LED Power Consumption: 33W Fuse: 7Amp Power Cord Daisy Chain: 18 Fixtures Max. Weight: 9lbs./ 3.7Kgs. Dimensions w/ Bracket: 21.33” (L) x 5.75” (W) x 7.63” (H) 542 x 143 x 194mm Colors: RGB Color Mixing + White DMX Channels: 16 Working Position: Any safe working position Warranty: 3 Year (1095 days) Please N ...