Inspire NS1001 Installation Manual

Location ............................................................................................................................................ 1 Removal of your old thermostat (if applicab ...

Installation WARNING Electricity is dangerous. Before commencing work, ensure that you read and understand these instructions and isolate the relevant circuit. If in any doubt whatsoever, do not continue, but consult a qualified electrician or heating engineer. This unit must be installed in accordan ...

Installing the Wall Mount The wall mount is supplied with fixings suitable for a solid wall. If you are fixing to another type of wall, then different fixings may need to be obtained. If you use different screws, ensure that they are the pan head or round head type and that when the screws are flush, ...

Install two AA Alkaline batteries (Supplied) into the back of the room thermostat, and ensure that the display is illuminated. It is easiest to start the two securing screws off before placing it on the wall, however do ensure that these screws do not protrude inside the room thermostat. Carefully lo ...