Lab.gruppen NLB 60E Operation Manual

1 CONTENTS .................................................................................................................................................2 2 IMPORTANT SAFETY AND OPERATION INSTRUCTIONS .....................................................................4 2.1 Explanation of graphical symbols .................... ...

9.3.2 Homepage and Overview .......................................................................................................20 9.3.3 Mute Subnet ...........................................................................................................................20 9.3.4 NLB 60E info ................................... ...

2.1 Explanation of graphical symbols The lightning symbol within a triangle is intended to alert the user to the presence of un-insulated “dangerous voltage” within the amplifier’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to humans. The exclamation point within a triangle is intend ...

See table below: •� Voltage Line plug according to standard 110-125 V UL817 and CSA C22.2 no 42. 220-230 V CEE 7 page VII, SR section 107-2-D1/IEC 83 page C4. 240 V BS 1363 of 1984. Specification for 13A fused plugs and switched and unswitched socket outlets This equipment should be installed near the socket outlet and discon ...

Thank you for choosing the Lab.gruppen NLB 60E NomadLink Bridge and Network Controller. We are confident that it will provide reliable service and exceptional operating flexibility as the keystone component in your NomadLink amplifier control network. Lab.gruppen’s proprietary NomadLink network allows easy setup and control of L ...

4.1 Unpacking Carefully open the shipping carton and check for any noticeable damage. Every Lab.gruppen product is tested and inspected before leaving the factory and should arrive in perfect condition. If found to be damaged, notify the shipping company immediately. Only the consignee may institute a claim with the carrier for da ...

5.1 Front-panel overview 5.2 Rear-panel overview 5 PAneL oveRvIeWs LED indicators: Front UI locked, Fault Mute Subnet 2x16 display White on blue Navigation keys: SELECT, ADJUST/SET, EXIT/ESC, ENTER/OK NomadLink Subnet Power ON/OFF NomadLink and Ethernet activity LEDs RJ45 Ethernet connector Ethernet on EtherCon housed RJ45 for st ...

6.1 Introduction Connecting the NLB 60E to Lab.gruppen amplifiers in a NomadLink network is a simple and straightforward procedure. All connections are made with standard (“straight”) Ethernet-type cables equipped with RJ45 connectors. Cable grade should be Cat5 or better. Once connected, the NomadLink network allows direct ac ...

6.4 NomadLink Wiring Notes All NomadLink ports on the NLB 60E, as well as ports on many NomadLink-equipped Lab.gruppen ampli- fiers, are equipped with Neutrik EtherCon “XLR” type connector housings. Connections may be made with standard RJ45 connectors, or with the more robust EtherCon connectors. The EtherCon housings offer ...