Aercus WS1093 Operation Manual
Text of Aercus WS1093 Operation Manual
- 2 -
WS1093
WS1093 PROFESSIONAL WIRELESS WEATHER STATION WITH
TOUCHSCREEN AND USB UPLOAD
Operation Manual
Thank you and congratulations on selecting this professional weather station. We are positive you will
enjoy the benefits of accurate weather readings and information that our weather stations offer. This
manual will guide you step-by-step through setting up your device. Use this manual to become familiar
with your professional weather station, and
- 3 -
WS1093
Getting Started
The WS1093 touch screen weather station includes a base station (receiver), a transmitter unit, one wind
direction sensor, one wind speed sensor, one rain gauge, one mounting tree, one USB cable and a
downloadable PC software package.
The Base Station is equipped with a Touch Screen LCD Monitor and allows the display of a large variety of
time and weather data:
Top Line - Time and Memory Data Usage
Left Middle - Wind, A
- 4 -
WS1093
Important Operation Notes
All actions and functions of the weather station are started on the touch screen by slightly touching (not
pressing) the related areas with the stylus, touch the flashing +, ON/OFF or – to make the corresponding
selection increase or decrease.
Note: the stylus can be found on the top rear of the console and can sometimes be stiff to remove the
first time.
Every time a programming step is activated by touching the re
- 5 -
WS1093
Reconnecting Lost Signal
If no outdoor weather data is displayed as a result of loss of signal during set up, mounting, changing of
batteries in the transmitter or plugging or unplugging cables, simply remove the batteries from the Base
Station wait 2 minutes and reinsert. After this the Base Station will make an initial measurement and
start to register the transmitter (the Outdoor Reception Signal icon will be turned on). Do not touch the
B
- 8 -
WS1093
The wind speed sensor’s cable is connected to the wind direction sensor.
The wind direction sensor’s cable is connected to the input marked Wind on the thermo-hygro sensor.
The rain sensor’s cable is connected to the input marked Rain on the thermo-hygro sensor.
- 9 -
WS1093
Setting Up
For basic settings touch the Touch Screen in the desired display area using the stylus. Note: setting
procedure can be exited at any time by touching any other function area (except “+”, “-” or “ON/OFF”.
The basic settings can be performed as follows:
Time
1) Touch the TIME section, the + and – button will be flashing. Touch the + button or – button to adjust
the contrast level from 0 to 8 (default 5).
2) Touch the T
- 10 -
WS1093
Memory
1) Touch the Memory section to activate the history data toggle display, the + and – button will be
flashing. Press the – button to toggle back to see earlier weather history data together with its time
stamp, press the + button to see more recent weather history data. When the history data is
displayed the corresponding time will be displayed in the time section area (the history data saving
interval is preset to 30 minutes). Note
- 11 -
WS1093
Date
1) Touch the DATE section, the + and – button will be flashing. Touch the + button or – button to shift
between alarm, date and day of the week format.
2) Touch the DATE section again, the + and – button will be flashing. Touch the + button or – button to
Shift between DD-MM format and MM-DD format for the date.
3) Touch the DATE section a third time, the + and – button will be flashing. Touch the + button or –
button to s
Aercus WS1093 - 12 -
WS1093
+ button or – button for 3 seconds to change the number faster. Touch the ON/OFF button to turn
the alarm on or off (the alarm icon will be turned on indicating the alarm function has been
activated).
4) Touch the rain section a fourth time to display the current maximum rain fall record. Touching the
rain section for 3 seconds will reset the maximum rain fall value to the current value.
5) Touch the rain section a fifth time to reset the
- 13 -
WS1093
Pressure bar graph
Touch the PRESSURE BAR GRAPH section and then press the + or – button to toggle the bar graph time
scale between 12 hrs or 24 hrs for pressure history.
Weather Forecast
1) Touch the WEATHER FORECAST section, the + and – button will be flashing. Touch the + button or –
button to shift the display between SUNNY, PARTLY CLOUDY, CLOUDY and RAINY icon (not generally
required as this will adjust automatically over a few da
- 14 -
WS1093
Indoor Temperature
1) Touch the INDOOR TEMPERATURE section, the + and – button will be flashing. Touch the + button or
– button to shift the display unit between C and F.
2) Touch the INDOOR TEMPERATURE section again to set the indoor temperature high alarm function,
the +, ON/OFF and – button will be flashing, the HI AL icon will light up. Touch the + button or –
button to change the value, hold the + button or – button for 3 sec
- 15 -
WS1093
function, the +, ON/OFF and – button will be flashing, the LO AL icon will light up. Touch the + button
or – button to change the value, hold the + button or – button for 3 seconds to change the number
faster. Touch the ON/OFF button to turn the alarm on or off (the alarm icon will be turned on
indicating the alarm function has been activated).
5) Touch the OUTDOOR TEMPERATURE section a fifth time to display the maximum outdoor
tempera
Aercus WS1093 - 16 -
WS1093
PC Connection
An important feature of the WS1093 is the capability for the recorded data to be downloaded, stored
and displayed on your PC.
Data Storage
The Base Station allows the internal storage of up to 4,080 complete sets of weather data with time and
date. Note: this data is lost when the batteries are removed so download to your PC prior to removing the
batteries if you wish to retain this information. When the memory capacity of the w