HDS Systems EDC Operation & User’s Manual

Text of the manual

EDC Flashlight Advanced User's Guide

Copyright 2014 by HDS Systems, Inc. All rights reserved. Congratulations for purchasing a superior flashlight. The HDS Systems EDC (everyday carry) series flashlights are best-of-class flashlights, providing regulated output at your desired brightness for extended periods. The single button directly selects your desir

1. Basic Operation

2. Advanced Operation 3. Low Battery Indication 4. Installing a New Battery 5. Thermal Limits 6. Disabling the Switch 7. Cleaning and Maintenance 8. Additional Notices and Cautions 9. Customizing Your Flashlight 10. Restoring Factory Settings 11. Enabling Customization 12. Internal Brightness Levels 13. Customizing the Brightnes

Quickly press and release the button while your flashlight is on to turn

off your flashlight. Please refer to the model-specific specifications on our web site for the default settings of your model’s presets and various features. Please also check our web site for updates to this manual. 2. Advanced Operation You communicate with your flashlight through

• Click, press and hold – turns on your flashlight to preset A. If

Pseudo Momentary is enabled, turns off when button is released. • Quad-click – toggles the Locator Flash on and off. From On: the following commands are available when your flashlight is turned on: • Click – turns off your flashlight. • Double-click – toggles between preset

Your flashlight restricts the output to the highest brightness level the

battery can maintain. However, if you turn off your flashlight and turn it back on again to a higher level, your flashlight will slowly step up through the brightness levels testing the battery again. Your flashlight will blink slowly once a second on the lowest brightness level when

In general, primary (non-rechargeable) batteries provide longer

runtimes. However, rechargeable batteries provide a lower cost of operation and allow you to always leave home with a full battery. 5. Thermal Limits Your flashlight monitors the LED temperature and the external flashlight temperature to protect the LED and to prevent the exterior from becomi

The exterior can be cleaned with a mild soap and water. Rinse well

and dry with a soft cotton cloth. Note: the anti-reflective coating on the lens can be abraded by excessive rubbing or cleaning. Never use paper tissues or paper towels to clean or dry the lens as the fibers are abrasive. 8. Additional Notices and Cautions Notice: your flashlight protects

Other Flashlight Manuals