DeWalt DC380 Operation & User’s Manual

experience, thorough product development and innovation make DEWALT one of the most reliable partners for professional power tool users. Technical data DC380 DC385 Voltage VDC 18 18 Max. power output W 340 390 No-load speed min-1 0-2,900 0-3,000 Stroke length mm 25.4 28.6 Weight (without bat ...

WARNING! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. SAVE THESE INSTRUCTIONS 1) WORK A ...

untrained users. e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. f) Keep cutting ...

Do not probe with conductive objects. Do not charge damaged battery packs Read instruction manual before use. Use only with DEWALT battery packs, others may burst, causing personal injury and damage. Do not expose to water. Have defective cords replaced immediately. Charge only between 4 °C and 40 °C. Discard the batt ...

1 Kitbox (DC380KA/DC380KB) 1 Instruction manual 1 Exploded drawing The DC385 package contains: 2 Battery packs, NiCd (DC385KA) 2 Battery packs, NiMH (DC385KB) 1 Charger (DC385KA/DC385KB) 1 Kitbox (DC385KA/DC385KB 1 Instruction manual 1 Exploded drawing NOTE: Battery packs and chargers are not included with N-models. � ...

WARNING: Prior to assembly and adjustment, always remove the battery pack. Always switch off the tool before inserting or removing the battery pack. WARNING: Use only DEWALT battery packs and chargers. Battery Pack (fi g.1) DC380, DC385 BATTERY TYPE The DC380 and DC385 operate on 18 volt battery packs. Charging the Bat ...

in figure 4. 3. Move the blade clamp lever (c) down to lock the blade clamping mechanism. 4. To remove the saw blade, proceed in reverse order. SAW BLADES material recommended saw blade ferrous metal fine-toothed non ferrous metal coarse-toothed wood coarse-toothed plastic fine-toothed masonry car ...