Entryvue 14215 Operation & User’s Manual

USER MANUAL (English) Item No. : 14215 Version2.0.1.2.02.27 The design and specifications can be changed without notice to users. Copyright of this manual is reserved. 1 2 3 6 5 4 7 8 9 # 0 * ...

2. Terminal Descriptions 1. Parts and Functions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 2. Terminal Descriptions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -1 3. Door Station Mounting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 4. System Connection - - - - - - - - - - ...

4. System Connection Basic IN-OUT Wiring: 1 2 3 4 7 5 6 Drill a hole and attach the rainy cover to it Attach screws to fix the metal box Attach the unit to the rainy cover correctlly Attach the baffle to protect the unit from droping The last view for all mounting The view for rainy cover after mounted Adjust the camera angl ...

Multi Door Stations Wiring: 1. Internal Power Supply Mode A. Connection for Power-on-to-Unlock type: B. Connection for Power--off-to-Unlock type: Use the power of the system to supply for the electronic lock, so that the lock can be connected to the door station directly, without an additional power supply for the electronic ...

-7- -6- 1. About room code(address): Room Code(also called room address) is a code assigned to each monitor, to identify different monitors; each monitor have a unique room code in one buidling.The room Code is stored in each Monitor’s inner EEPROM memory, and does not lose even the monitor is power off. 2. About Debug Sta ...

Table 2 (Installer Setup) : Basic Tools Detail : To check the voltage of the monitor, note that the monitor must be online. Item Submenu 1. Installer Setup 1. ID Code [0] 2. Unlock Timing [05] 3. Unlock Output [0] 4. Card Memory [0] 5. Doorplate Mode 6. Audio Options ... 7. Parameters ... ...

Table 2.1(Parameters): Monitor & Speak To enable Indoor Monitor under monitoring state can speak to Door Station at same time. If set to 1, talk enabled; set to 0, disabled. Monitor & Unlock Ring Numbers To enable Monitors under monitoring state can open the door at the same time.If set to 0, unlock function is disabled; Set to 1, ...

The DMR18 door station is a digital station with 320*240 pixels LCD screen, color CCD camera, night view LED, and digital keypad. Visitors can call the apartment by dialing the Flat Code (apartment number) on the keypad. If they don’t know the Flat Code (apartment number), they can search the name list on the scre ...

The Installer Code is the password to access the door station debug State. The default Installer Code is '66666666'. Note that if the Default Set have been activated, the Installer Code will be set to default value. 9. Change Unlcok Code: If door station runs as Debug State, you can press “1#” t ...

It's convenient to change the user interface for DMR18.Just put the config files to the SD card and by means of the digital keypad of door station,only 30 seconds is needed to update. Step 2: If door station runs as Debug State, you can press “1#” to activate Tools Menu, select “2” to enter setup page,the ...