Diezel Schmidt Operation & User’s Manual
Text of Diezel Schmidt Operation & User’s Manual
Table of Contents
Chapter One: Safety and Warranty
1.1 Safety Warnings
1.2 Warranty information
Chapter Two: Using your Schmidt
2.1 Mains Connections, power and Standby
2.1.1 Mains/connect to power outlet
2.1.2 Power up, Warm up, Standby off
2.1.3 Power tube caution
2.1.4 Operating Temperature
2.1.5 Power Tube Information
Chapter Three: Peripheral Connections
3.1 Front Panel Connections
3.1.1 Signal In
3.1.2 Cable ABC
3.1.3 Cable Selection
3.2 Rear Panel C
Chapter Six: Functions and Switches
6.1 Manual Channel Selection
6.2 External Switching
Chapter Seven: Maintenance and Cleaning
7.1 Cleaning
7.2 Care
7.3 Tube Change
7.4 Fuses
Chapter One: Safety and Warranty
1.1 Safety warnings
We would like to stress the importance of the following points, for reasons ofyour
personal safety, product longevity and product liability.
Do not use the Amplifier in or near wet locations
Do not store the Amplifier in damp or wet locations
Do not operate the Amplifier on voltages other than those designated on the rear
panel of the amplifier.
Do not open the panels of the amplifier. No user serviceabl
Chapter Two: Using Your Schmidt
2.1 Mains Connections, Power and Standby
2.1.1 Mains/Connection to Power Outlet
Please make sure that both switches (Power and Standby) are in the off position
before connecting to the mains circuit. Verify line voltage before connecting the
power cord. Never start Schmidt without connecting speakers to the proper
terminals. (See 3.2.5)
2.1.2 Power up, Warm up, Standby off
First, turn the Power switch to on (facing up). The
2.1.4 Operating Temperature
It will take a little more time after warm-up until everything inside the amp is
working in sync and to its fullest potential. A trained ear will notice a slightly
warmer tone and better complexity in tone after playing the amp for a short while.
It’s like stretching before exercising.
2.1.5 Power Tube Life
The power tubes of your amplifier are subjected to a certain aging process. Once
signs of aging, such as unreliability or
3.1.3 Cable Selection
In certain circumstances, it is desirable to match a guitar cord to a specific
instrument. One may use the otherwise undesirable qualities of a cord to one’s
advantage, if one has the time and patience to experiment with different cords and
guitars. This should be done while playing with your band, or while recording.
Sometimes it is difficult to tell a component’s true advantages until it is used in the
right context. A guitar th